Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#subaru

Descubre modelos 3D etiquetados como subaru y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Subaru Brat RC Body (1/24 Scale Crawler Body)

Subaru Brat RC Body (1/24 Scale Crawler Body)

Subaru Brat RC body Purpose This model is a 1/24 scale RC crawler body designed from a 3D scan. It is intended for use in scale RC crawler applications. Practical Uses While designed for 1/24 scale, the provided STEP files allow users to adjust the size and wall thickness to suit different requirements. This makes the model adaptable for various scales or custom printing preferences. Included Parts - Subaru Brat body.stl - bratty2 v5.step Printing and Assembly Guidance The author recommends printing the body at a 45-50 degree angle using organic supports. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC 1/8 Subaru WRX front and rear LED lights

RC 1/8 Subaru WRX front and rear LED lights

RC 1/8 Subaru WRX Front and Rear LED Lights Purpose These components are designed to provide LED lighting for a Delta Plastik USA Subaru WRX 1/8 scale body. They are intended for use on 1/8 scale buggies, both nitro and electric. Practical Uses These parts are used to add scale lighting effects to RC rally vehicles, specifically for night rally scenarios. Included Parts The model includes files for: - Hood LED components (4x) - Front light components - Rear light components Required Components To complete the lighting setup, the following LEDs are required: - Rally night headlights: 4pcs 20mm 3W LED spotlights. - Front lights: 2x 5mm super LED and 1x 3mm super LED. - Rear lights: 2x 3mm super LED. The author notes using an RC car lightset from AliExpress (approximately 10€). Printing and Assembly Guidance For printing, the author suggests using PLA impact, TPU, or PETG. Recommended print settings include 100% infill and a 0.2 layer height. Attribution: RCMAN79

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar