Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

15 modelos etiquetados · Página 1 de 1

#rc crawler

Descubre modelos 3D etiquetados como rc crawler y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Caja de herramientas de escala para plataforma de crawler RC

Caja de herramientas de escala para plataforma de crawler RC

Purpose This model is a toolbox designed for use with a 1/10 scale RC crawler featuring a flatbed. The author notes it can be adapted for other scales, such as 1/18 scale, by scaling the model down to 50% in a slicer. Practical Uses The toolbox serves as a storage container for RC crawler accessories. Without the lid, the dimensions are 144mm long, 54mm wide, and 33mm tall; with the lid, the total height is 36mm. Included Parts - rc tool box with lid.stl - rc toolbox lid.stl - rc tool box .stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC Crawler Servo and 4S LiPo Mount

RC Crawler Servo and 4S LiPo Mount

RC Crawler servo/battery mount Purpose This mount is designed for RC crawlers to position the servo at the lowest possible height. It also features a dedicated compartment designed to hold a 4S LiPo battery snugly, which is intended to eliminate the need for a battery strap. Practical Uses This component is used in RC crawler builds to optimize center of gravity by lowering the servo position and to secure a 4S LiPo battery without external fasteners. Included Parts - Component1.stl - Component2.stl Printing Guidance Based on the author's settings using a Neptune 4 Pro: - Infill: 100% - Layer Height: 0.2mm - Speed: 120mm/s - Supports: Tree supports

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC Crawler 4WD Servo Mount

RC Crawler 4WD Servo Mount

Servohalter für RC Crawler 4WD Purpose This model is a servo mount designed to facilitate the replacement of an original steering servo with a standard RC servo on a 4WD crawler. Practical Uses It is intended for RC crawler enthusiasts looking to upgrade or swap out factory steering components for more standard, widely available RC servo motors. Included Parts - 1 x servo-mount 41mm for crawler 4wd.3mf Printing/Assembly Guidance Not specified in the source text.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Subaru Brat RC Body (1/24 Scale Crawler Body)

Subaru Brat RC Body (1/24 Scale Crawler Body)

Subaru Brat RC body Purpose This model is a 1/24 scale RC crawler body designed from a 3D scan. It is intended for use in scale RC crawler applications. Practical Uses While designed for 1/24 scale, the provided STEP files allow users to adjust the size and wall thickness to suit different requirements. This makes the model adaptable for various scales or custom printing preferences. Included Parts - Subaru Brat body.stl - bratty2 v5.step Printing and Assembly Guidance The author recommends printing the body at a 45-50 degree angle using organic supports. ON-DEMAND INSPECTION COPY An additional source-derived STL simplifies dense triangles for interactive inspection. Source coordinate units are preserved. Original downloads remain unchanged; use them for fine details and fabrication checks.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC car GECKO test part

RC car GECKO test part

RC car GECKO test part Purpose This component serves as a calibration and test part for the GECKO 1:10 scale expedition RC crawler. It is designed to verify if a printer is properly set up to handle the complexity of the full GECKO model. Specifically, it allows users to test their ability to remove supports and achieve precise tolerances before committing to the complete build. Practical Uses Users can utilize this part to assess their printing experience and ensure their machine can produce the detailed components required for the full car. A primary use is testing bearing fitment; the part is designed to verify if a 10x15x4mm bearing can be inserted so that it fits securely without being loose. Included Parts - Mask v12.stl - Bearing test.stl Printing and Assembly Guidance It is suggested to print this part to determine if you can easily remove supports from the model. For assembly testing, attempt to insert a 10x15x4mm bearing into the printed part. According to the author, the bearing must fit while remaining snug and not loose. Detailed user guides are available in English and Czech via the provided documentation links.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de 3DSETS Bamboo Stand Remix

3DSETS Bamboo Stand Remix

3DSETS Bamboo - stand Purpose This model is a remix designed specifically to fit the 3DSETS bamboo. The primary modification from the original version is a shorter middle section. Practical Uses This stand is intended for use with RC crawlers or RC cars. According to the designer, the model works well when used with 110mm tires. Included Parts The model consists of three files: - Rear.stl - Front.stl - Center.stl Printing and Assembly Guidance The designer recommends printing with PLA using a 10% honeycomb infill pattern.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC receiver/ electronics box

RC receiver/ electronics box

rc receiver/electronics box Purpose This model is an electronics housing designed to protect a receiver and associated wiring. It is intended for use in RC crawlers, trucks, cars, or similar remote-controlled applications. Practical Uses It serves as a protective enclosure for RC electronics, providing a dedicated space to organize and secure a receiver and its wiring. Included Parts - Part Studio 1 - receiver box.stl - Part Studio 1 - receiver lid.stl Printing and Assembly Guidance The box is designed to be printed with any settings. Support is required for the antenna holder. For assembly, the lid features screw holes compatible with M3 size bolts. The main box is designed to accommodate M3 brass threaded inserts.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Vaterra Ascender Axle Servo Mount V1

Vaterra Ascender Axle Servo Mount V1

Vaterra Ascender Axle Servo Mount V1 Purpose This model is an axle servo mount designed specifically to fit the stock axles of the Vaterra Ascender. Practical Uses It is intended for use in RC crawler applications to secure a servo to the Vaterra Ascender axle assembly. Included Parts - Vaterra Ascender Axle Servo Mount.3mf Printing and Assembly Guidance To print this model, it should be laid face down with the use of supports.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC Venom Creeper Crawler Frame Rails

RC Venom Creeper Crawler Frame Rails

Rc Venom creeper crawler frame rails Purpose These replacement left and right frame rails are designed for the Venom Creeper crawler. They are intended to serve as sturdier alternatives to the original components while maintaining alignment with factory specifications. Practical Uses These rails are used to replace stock frame rails on a Venom Creeper crawler. They are designed to line up with all stock holes to ensure compatibility with existing hardware and chassis layouts. Included Parts - Left side frame rail - Right side frame rail Printing/Assembly Guidance The rails are designed to line up with factory frame rail specifications and stock holes.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de MN82 Steering mod

MN82 Steering mod

MN82 Steering mod Purpose This modification is designed for the MN82 RC model to increase the available steering angle. It achieves this by allowing the user to utilize the last bolt holes of the servo. Practical Uses This mod is intended for RC enthusiasts looking to improve the maneuverability of their MN82 vehicles. While the designer based the geometry on the MN82T variant, they indicate it is likely compatible with other MN82 variants. Included Parts - steering v4.stl Printing and Assembly Guidance Assembly involves repositioning the servo to use the furthest available bolt holes to facilitate the increased steering range. Please note that compatibility with non-T variants is based on the designer's assessment.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Injora 370 Motor & Transmission Mount (Custom RC Crawler Motor Mount)

Injora 370 Motor & Transmission Mount (Custom RC Crawler Motor Mount)

This custom-designed motor and transmission mount is engineered specifically for the Injora 370 motor with an integrated transmission. Its primary purpose is to provide a secure, clean mounting solution that ensures proper alignment and stability for the motor/transmission assembly during operation. Practical uses include DIY chassis builds, custom RC conversions, and RC crawler projects. While designed for use with WPL C14, C24, and C44 platforms, the author notes that fitment may vary based on specific drivetrain configurations and chassis modifications; therefore, test fitting is recommended prior to final installation. Included Hardware: To complete the installation, you will need 4 stock mounting bolts/screws for the chassis rails and 4 bolts/screws from the Injora transmission. The author states that no additional extra hardware is required. Printing and Assembly Guidance: - Recommended Materials: PLA+ or PETG (PETG is preferred for increased durability). - Print Orientation: Flat on the print bed. - Infill: 20–40% recommended for structural strength. - Supports: Angle the part at approximately 30 degrees and utilize organic supports.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Shovel RC accessory

Shovel RC accessory

This model is an RC accessory shovel designed specifically for use with an RC crawler. It serves as a scale detail component to enhance the realism of remote-controlled off-road vehicles during simulated terrain navigation or recovery scenarios. Practical uses include adding aesthetic scale realism to crawler builds or using the tool as a prop for scale dioramas and trail driving. Included parts: - Shovel.stl Printing and assembly guidance: No specific printing parameters or assembly instructions are provided in the source documentation.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC Shock Tower 1/12

RC Shock Tower 1/12

RC Shock Tower 1/12 by mj3dtech Purpose This custom shock tower plate is designed to provide alternative mounting hole configurations for front shock assemblies. It is intended to allow for adjustments in shock positioning. Practical Uses According to the author, this component is designed to fit the MN82. It serves as a tuning part for RC crawlers to accommodate different shock setups. Included Parts - TOWER.stl - UPPER-SPACER.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de SCX24 upgrade 180/320 motor

SCX24 upgrade 180/320 motor

SCX24 upgrade 180/320 motor Purpose This model is a motor conversion designed for the Axial SCX24. The upgrade aims to replace the original motor, which the author reports often burns out under long-term load, with a unit that provides higher speed and better performance in extreme conditions, such as mud. Practical Uses This conversion is intended for RC crawler enthusiasts looking to improve the drive unit's durability and power output during heavy-duty or high-load driving scenarios. Included Parts - HGD1_14t_Pinion.stl - aJprwKyApLG (4).stl - Kolo v převodovce Originál Axial.stl Printing and Assembly Guidance The author recommends printing the gears in PET-G, noting that it proved most effective during testing. While PLA was used initially, PET-G was found to be superior. The author also tested ASA but noted that the small gears deformed during the printing process because the ASA could not cool fast enough; therefore, PET-G is the recommended material.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC4WD TF3 Servo Relocator

RC4WD TF3 Servo Relocator

Purpose: This part is designed to change the position of the steering servo on the RC4WD Trail Finder 3 chassis. It replicates the original front cross member with integrated servo plates to create space for a servo after removing the engine using the RC4WD Z-S2179 CNC Optional Motor Mount. Practical Uses: It is intended to resolve steering issues on the Trail Finder 3 by utilizing the space made available by the optional motor mount. Included Parts: - TF3-Servo-Relocator.stl Printing/Assembly Guidance: The author suggests printing with PLA+ at 30% infill using standard settings. During assembly, some bending may occur, which the author notes is normal; the part remains strong once fully assembled. Do not overtighten the screws as the part is plastic.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar