2 modelos etiquetados

#service ramp

Descubre modelos 3D etiquetados como service ramp y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Open-Lattice Service Ramp for 1:18 RC Cars - STL and 3MF

Create a small service or display ramp for an RC car. The source photograph shows two matching ramps side by side, each with a sloping top, rectangular tread openings and open rectangular side supports. The source folder and filenames label this design for 1:18 RC vehicles. The download includes one STL file and one 3MF file, supplied as alternative formats. These are two files, rather than evidence of two distinct ramp variants. Print additional copies as required for a pair. Both have English filenames and retain their original geometry and file contents. Check the ramp width, incline and wheel contact area in your slicer against the intended vehicle before printing. Compatibility, load capacity and print settings have not been physically tested by MESHOPIA. No vehicle, assembly hardware or separate instructions are included in the extracted package. Select material, orientation, walls and supports after inspecting the model. The new cover is a studio render of the actual supplied STL, reoriented for an upright service-ramp presentation and given a different finish, lighting, camera view and background. It shows one ramp; print another copy if you need a pair. The original digital model files are preserved.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Textured Service Ramp for 1:10 RC Drift Cars - STL

Add a small raised wheel support to an RC display or workbench setup. The source photograph shows a pair of matching ramps with straight inclined approaches, a repeating circular surface pattern and an elevated flat section supported by an open frame. The source folder and filename label the design for 1:10 RC drift cars. One STL file is included, renamed 01-textured-rc-service-ramp.stl in English without altering the printable geometry. The two physical ramps in the reference show a possible paired setup; the file inventory does not establish two separately supplied variants. Inspect the STL layout and print additional copies as needed. No car or other track equipment is included. Compare the ramp width, surface features and elevated support with your intended tires and vehicle. Wheel fit, load capacity, traction and print settings have not been physically tested by MESHOPIA. Select material, orientation, walls and supports after reviewing the model in your slicer. No separate hardware or assembly guide is documented in this extracted set. The MESHOPIA cover is a studio render of the actual STL geometry, showing one ramp with its circular surface features, recessed rear platform and open supports. The supplied geometry is unchanged; the new finish, lighting and background are part of the visualization.

Technology: Sin probar
material: —
Difficulty: Sin especificar