Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

2 modelos etiquetados

#rc tank

Descubre modelos 3D etiquetados como rc tank y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Spur Gear 20T-8T for Heng Long Tiger I RC Tank 1:24

Spur Gear 20T-8T for Heng Long Tiger I RC Tank 1:24

A spur gear for the Heng Long Tiger I 1:24 RC tank. The author designed this as a replacement after an original gear broke. The author suggests printing in a tough material like Nylon or ABS, though they report having printed in PETG which holds for light play. The files include different center shaft tolerances; the author notes that on their Bambulab A1, the gear did not fit the shaft when printing with a 2.1mm diameter (shaft diameter is 1.95mm). Recommended Print Settings: • Layer height: 0.16 mm • Perimeters: 8 (the author states perimeters should fill 100%) • Infill: doesn't matter • Supports: none • Nozzle: 0.4 mm (0.2 recommended) The author printed it with 8 perimeters, at a layer height of 0.16 with a 0.4mm nozzle.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de ABRAMS A1M2 TANK, 1/20 SCALE

ABRAMS A1M2 TANK, 1/20 SCALE

A 3D model of an Abrams A1M2 tank. The author reports building the tank at a 1/20 scale using an ESP32 and a PS4 controller, though other electronic control systems may be used. The author has provided code, a parts list, and circuit diagrams via a GitHub link. 3D printing settings reported by the author: - Filament: PLA - General parts: 15% infill, two walls, and supports where needed. - Delicate moving parts: 100% infill, four walls, and supports.

Technology
Sin probar
material
—
Difficulty
Sin especificar