OVERVIEW
This long-wing electric sailplane is presented as a complete printable airframe resource set with an assembled, painted digital display reference. The standard display joins28 original printed components: the four main fuselage sections, ten wing sections, four aileron sections, eight tail components, a rear collar and one selected motor-mount plate. Source mesh vertices and faces are retained; the assembly uses rigid positioning rather than reshaping the airframe.
WHAT THE FOUR DOWNLOADS CONTAIN
The complete source-resource ZIP retains52 unique supplied resources plus30 embedded STL instances:34 standaloneSTL files,4factory projects,4G-code resources,3INI profiles,3slice files,3PDF documents and the supplied reference image. A native editable Blender package contains the assembled display and an English resource guide. Two complete, coloured3MF assemblies are provided:28 supplied printed parts only, and the same28parts plus one explicitly identified purchased-tube reference. There is no mesh decimation. The3MF assemblies are viewing references, not ready-to-print plates; use the individual source parts for slicing.
DOCUMENTED PURCHASED HARDWARE
The source assembly guide specifies a10mmOD/9mmID carbon tube of at least460mm length. The illustrated assembly includes a separate dimensioned reference for that documented purchased tube. It is not an original supplied printable file and is not a printable replacement for carbon hardware. The source-only3MF deliberately omits it. Motor, folding propeller, battery, ESC, servos, radio system, pushrods and other installation hardware are not included or invented in the display.
DIMENSIONS AND SCALE
The digital display bounds are approximately1033.00 x1523.58 x178.00mm, expressed as length, span and height. The supplied guide quotes approximately1033mm length,1527mm span and177mm height. The nominal source length is used as an illustration layout datum; this is not a measurement or certification of a built aircraft. Source units are millimetres; no miniature scale is asserted.
FORMATS AND VARIANTS
All supplied formats and unique variants are retained, including four motor-mount options and the three FPV conversion components. FPV resources remain separately selectable rather than being mixed into the standard fuselage. Factory project references use opaque relative paths with retained facet-equivalent meshes. INI, slice, documentation and reference resources are preserved. Included G-code was treated as data and never executed. Native slicer GUI compatibility has not been certified.
PRINTING ADVICE - UNTESTED
No physical print has been completed for this publication. Treat all suggestions and supplied historical profiles as starting references. Inspect thin-wall aircraft sections, internal reinforcement, units and toolpaths in your slicer. Establish perimeter continuity, layer bonding, bed adhesion and cooling on small samples before committing to the complete airframe. The source documentation discusses thin-wall printing; avoid assuming that ordinary solid-part settings, an automatic mesh repair, or uniform infill will preserve that design intent. Included machine-specific G-code must not be run blindly.
ASSEMBLY AND FINISH - UNTESTED
Follow the retained source guides and dry-fit before adhesive. The supplied instructions describe joining printed sections and fine-tuning fit. Printer tolerances, glue gaps, alignment, hinges and hardware seats still require physical checks. The display is not a manufacturing jig and its clearances are not evidence of working controls. For the proposed exhibition finish, test compatible surface preparation, primer and thin paint coats on a sample. Keep attachment faces, access openings and hinge clearances functional.
IMAGE AND TEST DISCLOSURE
The gallery is a digital illustration built from the actual assembled geometry, physical paint/light shaders and local-PC AI-generated background context. Model geometry is protected rather than redrawn by AI. The purchased tube is clearly identified reference hardware; clear exhibition supports are photographic context and are not downloaded source components. Images are not evidence of a physical print, successful assembly, balance, powered operation or flight. Print, mechanical fit and flight status remain UNTESTED.
CREDIT AND LICENSE
The supplied guide identifies3DLabPrint. Original source notices and credits are retained. This resource is published free asCC0 under the uploader's explicit authorization, by the Tomás Piernas account; New opaque filenames do not imply that identical geometry cannot be recognized.
TAGS
sailplane, electric glider, printable airframe, RC aircraft, thin-wall printing, long wing, model kit, assembled reference, blue and yellow, native project, FPV conversion, untested, CC0
HASHTAGS
#Sailplane #ElectricGlider #PrintableAircraft #RCAirframe #ScaleModelling #ThinWallPrinting #ModelKit #CC0
- Technology
- Sin probar
- material
- —
- Difficulty
- Sin especificar
