2 tagged models · Page 1 of 1

#pulley

Discover 3D models tagged pulley and check their print information, files and terms before downloading.Search this tag in the catalogue →

RC & MecánicaFree

Pulley for TT DC motor

This model provides pulleys designed specifically for use with TT Geared DC motors (Yellow). The set offers multiple diameter options to accommodate different mechanical requirements. Purpose The purpose of these files is to provide an adapter interface for TT Geared DC motors, allowing them to drive belt or string-based systems. Practical Uses These pulleys can be used in robotics or small-scale mechanical projects where a TT Geared DC motor needs to transfer motion via a belt or cord. Included Parts The download includes the following files: - Pulley TT DC motor-30mm.stl - Pulley TT DC motor-50mm.stl - Pulley TT DC motor-75mm.stl - Pulley TT DC motor - STP.stp

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaFree

Configurable Belt Drive for First Stage of Transmission - 1/10 RC Drift

Purpose These pulleys are designed to convert a 1/10 RC drift car to use a belt drive first-stage in place of gears. Note that using a belt drive first stage will reverse wheel rotation, requiring a gear swap in the transmission or ESC reprogramming to correct. Practical Uses The pulley profiles are HTD 3mm, though the designer recommends using them with S3M belts to reduce friction. For a 15T/40T pulley setup, a 50T belt is suggested as a starting point. The pinion is intended to press onto a 14T/48P pinion gear. Included Parts - Pinion - 15T.step - Spur - 40T.step - S3M 15T YinYang.stl Printing and Assembly Guidance Print components true to size for best performance. The spur features an 8x16mm bolt circle to fit most drift chassis. The pinion is configurable from 14-20T and the spur is configurable from 36-48T.

Technology: Sin probar
material: —
Difficulty: Sin especificar