Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#modification

Descubre modelos 3D etiquetados como modification y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de BowHouse RC SVT Big Bore Mount - RISER

BowHouse RC SVT Big Bore Mount - RISER

This model is a riser designed for the BowHouse RC SVT Big Bore mount. According to the author, using the mount alone resulted in a mesh that was too tight, while the official risers sold by BowHouse were too high. This specific version is intended to provide the correct height for stock gearing. The author notes that the height can be adjusted by raising or lowering the part by the required amount to suit specific needs. Practical Uses: This part is used as a spacer or riser for the BowHouse RC SVT Big Bore mount to achieve the correct mesh when using stock gearing. Included Parts: - BowHouseRiser.3mf

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Q903 /Q905 18650 Battery Mod

Q903 /Q905 18650 Battery Mod

Q903 / Q905 18650 Battery Mod Purpose This modification is designed for the Hosim Q903 and Q905 RC cars. It allows users to upgrade from stock batteries to 2s (7.4V) 18650 Li-ion battery packs, providing increased capacity and greater flexibility. Practical Uses This mod is ideal for users seeking longer run times and easier battery swaps. The holder is designed to securely hold standard 18650 cells and fits the vehicle chassis with minimal changes required. Included Parts - Q905Battery_Holder.stl - Base.stl Printing and Assembly Guidance To assemble, use a couple of small self-tapping screws to secure the base to the holder. The hold downs for the elastic require a quick cut with a hobby knife during installation.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar