Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

1 modelo etiquetado · Página 1 de 1

#losi xxx-cr

Descubre modelos 3D etiquetados como losi xxx-cr y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de ESC Mount for Losi XXX-CR

ESC Mount for Losi XXX-CR

ESC Mount for Losi XXX-CR Purpose This model is a small mount designed to hold a brushless ESC within the Losi XXX-CR chassis. It is specifically designed to manage space constraints, allowing the components to fit under the XXX-CR body where room is limited. Practical Uses Once attached to the chassis, the ESC is secured to the mount using double-sided tape. This provides a dedicated location for the electronic speed controller in a tight compartment. Included Parts - ESC mount (available in .stp, .3mf, and .stl formats) Assembly Guidance The mount utilizes existing unused holes located on each side of the battery bay. To install, the holes in the chassis must be tapped using a #4-40 hand tap, and the bracket is then attached with suitable #4-40 screws. The source notes that M3 taps and fasteners may also work for this application.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar