Información del modelo
Descripción
ESC Mount for Losi XXX-CR
Purpose
This model is a small mount designed to hold a brushless ESC within the Losi XXX-CR chassis. It is specifically designed to manage space constraints, allowing the components to fit under the XXX-CR body where room is limited.
Practical Uses
Once attached to the chassis, the ESC is secured to the mount using double-sided tape. This provides a dedicated location for the electronic speed controller in a tight compartment.
Included Parts
- ESC mount (available in .stp, .3mf, and .stl formats)
Assembly Guidance
The mount utilizes existing unused holes located on each side of the battery bay. To install, the holes in the chassis must be tapped using a #4-40 hand tap, and the bracket is then attached with suitable #4-40 screws. The source notes that M3 taps and fasteners may also work for this application.
Texto original del autor en Printables
<p>This mounts using the existing unused holes on each side of the battery bay. The holes in the chassis need to be tapped using a #4-40 hand tap and the bracket attached with suitable #4-40 screws. M3 tap and fasteners would probably work too. Once attached to the chassis, the ESC is mounted with double sided tape. There is very little room under the XXX-CR body and this manages to just fit everything in there.</p>
Preguntas y aportaciones