Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

8 modelos etiquetados · Página 1 de 1

#gear

Descubre modelos 3D etiquetados como gear y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Soporte de motorreductor N20 con fijaciones de 3 mm

Soporte de motorreductor N20 con fijaciones de 3 mm

Purpose This is a mounting bracket designed to hold N20 DC gear motors securely. The motor slides into the holder for placement. Practical Uses The author states this bracket is suitable for DIY robotics, RC cars, small rovers, and other electronics projects. Included Parts - motor holder.step - motor holder.stl Assembly Guidance The bracket can be attached to a chassis or other surface using 3 mm screws through two integrated mounting holes.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Tecnock RC Car gear

Tecnock RC Car gear

Tecnock RC Car gear Purpose This model is a replacement gear designed for the motor of a Tecnock RC car. The author created this part to replace an original gear after one of its teeth snapped off. Practical Uses It serves as a functional substitute for a broken motor gear in a Tecnock RC car. The author notes that this specific version may result in a louder operating sound, which they suggest is likely due to excessive slop between the gear teeth. Included Parts - Gear_5_10mm_Capped.stl Printing and Assembly Guidance No specific printing or assembly instructions are provided in the source text.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Tamiya TT02 70 Tooth Spur Gear

Tamiya TT02 70 Tooth Spur Gear

Tamiya TT02 70 Tooth Spur Gear Purpose This model is a 70-tooth spur gear designed for use with a Tamiya TT-02 chassis. It features a 0.6 Module pitch and is intended to mesh with a companion 0.6 Mod pinion gear. Practical Uses It serves as a replacement or upgrade component for RC vehicle power and drive systems. While the hole pattern is specifically designed for a Tamiya TT-02 chassis drive shaft, the creator notes it may fit other builds. Printing Guidance For optimal results, it is recommended to print with a 0.12 layer height using a 0.4mm nozzle or smaller. Suggested print settings include 6 top layers, 6 walls, and 35% cubic infill. While PLA is functional, nylon is recommended as an ideal material. During operation, it is suggested to run the gear slowly at the start and use oil or grease. Included Parts - TT-02 70T spur gear 0.6 Mod.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de 1/24 Hot Wheels RC Gear

1/24 Hot Wheels RC Gear

This model is a gear designed for use with 1/24 scale Hot Wheels RC vehicles. It is intended to serve as a replacement or modification component for the internal drivetrain of these specific scale models. Practical uses for this file include repairing or upgrading the mechanical gear systems within 1/24 scale remote-controlled cars. Included parts: - Shiny Crift (2).stl Note: Users should ensure compatibility with their specific RC model before printing or installation.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de WLtoys 144001 Metal Differential Housing

WLtoys 144001 Metal Differential Housing

This model is a metal differential housing designed specifically for the WLtoys 144001 RC vehicle. It serves as a reliable upgrade for hobbyists seeking improved performance and longevity for their 144001 model. In practical use, this housing provides a direct-fit replacement or upgrade for the stock differential components. The author specifies that the Wltoys XK 144001 Metal Differential should be used as the differential gear for this setup. Included parts and required hardware: - Metal Differential Housing - Required bearings: MR105ZZ - Required gear: Wltoys XK 144001 Metal Differential Note: This listing is based on the provided source data. Users should refer to the specific hardware requirements mentioned by the author for successful assembly.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Gear 48 - 9 Spare Part

Gear 48 - 9 Spare Part

This is an RC car spare part identified as Gear 48 - 9. It is designed to serve as a replacement component for RC car models. Practical uses include repairing or maintaining RC vehicles that require this specific gear part. Included files: - Gear_Spare_Part_RC_Car.obj IMAGE PRESENTATION The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de TS4N 44T and 41T Replacement gear

TS4N 44T and 41T Replacement gear

TS4N 44T and 41T Replacement gear Purpose These files are designed as replacement gears for an RC car. The author originally created these parts as a temporary fix to use while waiting for original components to arrive. Practical Uses These gears can be used to replace broken second gears in a TS4N RC car. The set includes two different tooth counts to accommodate specific needs. Included Parts - TS4N 44T Gear.stl - TS4n_41T_gear.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar