Meshopia · EnglishEnglish
MESHOPIAScale modelling & RC

1 modelo etiquetado

#filament

Descubre modelos 3D etiquetados como filament y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Generic base for adaptations Sunlu S2 (CR-10S Pro filament sensor version) DO NOT USE!! Files: Adapter.stl, adapter.step

Generic base for adaptations Sunlu S2 (CR-10S Pro filament sensor version) DO NOT USE!! Files: Adapter.stl, adapter.step

The author provides a generic base for adaptations on the Sunlu S2. The author notes that the design is tight and was created to move a filament sensor closer to the Sunlu S2. The author states this specific version was made for a CR-10S Pro filament sensor and may not be perfectly aligned. The author advises that if using the design, one should add at least 0.5-1mm on the arm extended and fix the hole distance. The author suggests that changing all holes by 0-1mm may assist with alignment. The author states it is done to be used with Voron M3 inserts, though this can be changed. The author provides the .step file to allow users to modify the holes for an adaptable base. The author reports the fit is very tight.

Technology
Sin probar
material
—
Difficulty
Sin especificar