Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

6 modelos etiquetados · Página 1 de 1

#engine

Descubre modelos 3D etiquetados como engine y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de GP123 Engine Ignition mount

GP123 Engine Ignition mount

GP123 Engine Ignition mount Purpose This model is designed as an ignition module mount specifically for the GP123 Great Power Engine used in RC planes. Practical Uses It serves as a dedicated mounting solution to secure the ignition module within an RC airplane setup utilizing the GP123 engine. Included Parts - RC_LUDO_GP123_Ignition-3D.stl Printing and Assembly Guidance The author reports that this model should be printed in PLA and requires the use of supports during the printing process.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de DLE111 DLE120 Engine Ignition mount

DLE111 DLE120 Engine Ignition mount

DLE111 DLE120 Engine Ignition mount Purpose This model is designed to serve as a mount for the ignition module used with DLE 111cc or 120cc engines. Practical Uses It is intended for use in RC aircraft applications to secure the ignition module to the engine setup. Included Parts * RC_LUDO_DLE_111_120_Ignition_mount.stl Printing and Assembly Guidance The author reports that this part can be printed in PLA. It is compatible with printing settings both with or without supports.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de AJ Aircraft Raven 92" Low Pressure Lip cooling

AJ Aircraft Raven 92" Low Pressure Lip cooling

AJ Aircraft Raven 92" Low Pressure Lip cooling Purpose This model is designed for the AJ Aircraft Raven 92" RC Airplane. It functions as a low pressure lip intended to improve engine cooling by providing higher airflow output. Practical Uses It is used as an aerodynamic component to enhance the cooling efficiency of the engine during flight. Included Parts - RC_LUDO_-_AJ_Raven_92_Low_Pressure_Lip.stl Printing and Assembly Guidance The model supports an overhang angle set to 60-70º, though the specific angle may depend on your printer settings.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Motor Halter/ Engine holder

Motor Halter/ Engine holder

Motor Halter / Engine holder Purpose This model is a construction designed to hold an electric engine in place. Practical Uses It is intended for use in RC applications, specifically for securing brushless motors within an RC car setup. Included Parts - Motorhalter.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Messerschmitt BF 109 — 3D Printable RC Aircraft

Messerschmitt BF 109 — 3D Printable RC Aircraft

A BF 109-inspired RC warbird with a narrow fuselage, low wing, enclosed cockpit and conventional tail. Printable sections and supplied preparation files support a multipart build. PACKAGE CONTENTS 2 PDF files, 8 GCODE files, 8 FACTORY files, 35 STL files, 3 INI files, 3 SLICE files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA. ADDITIONAL BF 109H LANDING-GEAR CONVERSION PARTS A separate ZIP adds five newly recovered STL meshes: left and right inner wing sections prepared for landing gear, main and tail landing-gear patterns, and a conversion rudder. These source files belong to the me109_H_LG_conversion folder. They are additional conversion parts, not another complete airframe. Every added filename is in English and an English guide maps each part to its source label. Original STL bytes and coordinates are preserved; binary triangle counts were checked. Confirm dimensions, variant compatibility, assembly fit, hardware requirements and print preparation before use. The conversion has not been physically built or flight tested by MESHOPIA. The original aircraft package and watermarked cover remain available. ADDITIONAL NATIVE SOURCE FILES The additional English-named source ZIP contains 2 unique native geometry files in FACTORY format(s), together with available source companions and a filename mapping guide. Native source bytes are preserved. Component or material paths may need relinking using that guide. 2 source-derived STL display previews are added separately for on-demand browser viewing. Use compatible CAD or source software for native files without a verified preview. Existing files remain available. Display derivatives do not establish printability, dimensions, fit or flight performance.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar