2 modelos etiquetados · Página 1 de 1

#ender 3 v3 se

Descubre modelos 3D etiquetados como ender 3 v3 se y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

HerramientasGratis

Pulling Pin Assistants for CR Touch of V3SE

Pulling Pin Assistants for CR Touch of V3SE Purpose This tool is designed to assist with the "CR Touch error, please contact customer service" issue encountered on the Ender 3 V3 SE. It serves as a specialized handle to help users manually pull the CR-Touch pin up and down to address a stuck pin, providing an alternative to using pliers or other improvised tools. Practical Uses When the CR-Touch pin becomes stuck, users can use this assistant to repeatedly move the pin up and down. After performing this action, the printer can be restarted to attempt to resolve the error. Included Parts - CR-Touch-Attach-30mm.stl - CR-Touch-Attach-20mm.stl Printing Guidance To ensure proper functionality, the following print settings are recommended: - Filament Type: PETG or ABS - Infill: 100% - Layer Height: 0.1 mm - Print Speed: Below 30mm/s - Adhesion: No adhesion required

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

HerramientasGratis

[FIX] CR-Touch error, please contact customer service

This model provides a discussion and a workaround for the Ender-3 V3 SE CR-Touch homing failure, where the probe pin fails to deploy at startup. The author suggests a "pre-parked" method: manually sliding the heated bed (Y-axis) all the way back and pushing the toolhead (X-axis) all the way to the left against the physical endstops before powering on the machine. This method aims to minimize motor current draw, relieve cable strain, and eliminate travel vibrations that may prevent the pin from deploying. Practical uses include troubleshooting CR-Touch deployment errors and providing a temporary solution to allow the printer to home and begin prints. The author suggests checking toolhead cable connections or using the provided file to print a cable strain relief bracket. Included files: - cr-touch-attach-30mm.stl

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar