Información del modelo
Descripción
Pulling Pin Assistants for CR Touch of V3SE
Purpose
This tool is designed to assist with the "CR Touch error, please contact customer service" issue encountered on the Ender 3 V3 SE. It serves as a specialized handle to help users manually pull the CR-Touch pin up and down to address a stuck pin, providing an alternative to using pliers or other improvised tools.
Practical Uses
When the CR-Touch pin becomes stuck, users can use this assistant to repeatedly move the pin up and down. After performing this action, the printer can be restarted to attempt to resolve the error.
Included Parts
- CR-Touch-Attach-30mm.stl
- CR-Touch-Attach-20mm.stl
Printing Guidance
To ensure proper functionality, the following print settings are recommended:
- Filament Type: PETG or ABS
- Infill: 100%
- Layer Height: 0.1 mm
- Print Speed: Below 30mm/s
- Adhesion: No adhesion required
Texto original del autor en Printables
<p>“CR Touch error, please contact customer service”</p><p>The problem of CR Touch in Ender series model 3 V3 SE as many people might experienced, and many people tried countless of method or techniques to address this stuck-CR-pin. One of the most popular method is using plier or something-like to pull the CR-Touch pin up to down and repeat, then restart the printer to solve the issues.</p><p><strong>I believe many people might suffer with that method, so today I designed a Pulling Pin Assistants to help you out.</strong></p><p><i>Print Requirements:</i></p><ul><li>Filament Type -PETG or ABS</li><li>Infill - 100%</li><li>Layer Height - 0.1 mm </li><li>Speed - below 30mm/s</li><li>Adhesion - No </li></ul>
Preguntas y aportaciones