4 modelos etiquetados · Página 1 de 1

#elegoo

Descubre modelos 3D etiquetados como elegoo y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →

HerramientasGratis

Spool holder hole cover Elegoo CC

Spool holder hole cover Elegoo CC Purpose This model is designed to cover the hole on the Elegoo Centauri Carbon where the spool holder is typically attached. It is intended for users who have detached the spool holder, such as those using an external filament dryer to feed filament to the printer. Practical Uses It serves as a plug to close the opening left behind after the removal of the original spool holder hardware. Included Parts - Cover spoolholder hole Elegoo CC.stp - Cover spoolholder hole Elegoo CC.stl Printing and Assembly Guidance The author suggests printing the model with the slot-side facing up. It is recommended to use supports during the printing process; the author notes that "normal support works the best for me."

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

HerramientasGratis

Alivio para cable elegoo CC remix cable securement part

Alivio para cable elegoo CC Purpose This model is a remix of two existing designs created to secure the printhead cable and prevent damage caused by repetitive movement over time. Practical Uses It is intended to fix issues related to cable breakage on the Elegoo CC printer by providing stability and protection to the cable assembly. Included Parts - Alivio ElegooCC .stl Printing and Assembly Guidance The author recommends printing the part in ABS or ASA for best performance. For installation, the author suggests placing the part onto the cable first and then sliding it into the correct position to make the process easier. This design does not require any additional accessories for use.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

HerramientasGratis

CC Superman Handle

CC Superman Handle for Centauri Carbon Purpose This model is a Superman-themed logo handle designed for the Centauri Carbon. Practical Uses It serves as a decorative replacement or addition to the default handle of the Centauri Carbon printer. Included Parts The .3mf file contains three separate plates with saved settings: Red, Yellow, and Blue. Printing and Assembly Guidance The blue parts require supports. The author has painted the supports in the file to avoid closing the holes intended for the screws that hold the default handle. Assembly of the logo requires the use of glue. The estimated print time is approximately 45 minutes.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar

HerramientasGratis

Elegoo CC Half-Life fan cover

Elegoo CC Half-Life fan cover Purpose This model is a themed fan cover designed specifically for the Elegoo Centauri Carbon 3D printer. It serves as a decorative accessory inspired by the Half-Life video game franchise. Practical Uses It is intended to be used as a cover for the fan on an Elegoo Centauri Carbon printer, incorporating aesthetic elements from the Half-Life series, such as the Lambda symbol and references to Black Mesa. Included Parts - HLfancover.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source data.

Tecnología: Sin probar
Material: —
Dificultad: Sin especificar