Meshopia · EnglishEnglish
MESHOPIA

2 modelos etiquetados

#drift

Descubre modelos 3D etiquetados como drift y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Servo arm for Eachine Eat 15 and Udirc 1603 RC drift car

Servo arm for Eachine Eat 15 and Udirc 1603 RC drift car

A servo arm designed for the Eachine Eat 15 RC drift car. The author states it is also compatible with the Udirc 1603. The author tested this on an Eachine Eat 15 car and reports it remained durable after over 30 hours of usage. The author used PLA+ for the print. Note: The author used a horizontal expansion setting of 0.0, but states this depends on your 3D printer.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Drift Ring for MJX Hypergo 1430x 1/14 Scale RC Car

Drift Ring for MJX Hypergo 1430x 1/14 Scale RC Car

A drift ring designed for the MJX Hypergo 1430x 1:14 scale stock tires, intended to convert the RC car for drifting. The ring is designed for a snug fit over the default rubber tire to prevent slipping. Assembly Instructions: - One side of the ring features an inside edge/lip; this edge must face the inside of the car. - Remove the wheel/tire from the car, slide the ring on with the correct orientation, and remount the wheel. Print Settings: - Material: The author recommends PETG for impact resistance and durability on hard surfaces. - Infill: 100% (solid layers are required for structural integrity and longevity). Files: mjx_hyper_go_drift_ring_1_14.stl

Technology
Sin probar
material
—
Difficulty
Sin especificar