Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#dragon burner

Descubre modelos 3D etiquetados como dragon burner y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de Dragon Burner V8 CR-Touch Shroud

Dragon Burner V8 CR-Touch Shroud

Dragon Burner V8 CR-Touch Shroud Purpose This model provides CR-Touch support for the Dragon Burner V8 toolhead. It is designed to integrate bed leveling capabilities into the existing toolhead setup. Practical Uses It is used to mount a CR-Touch sensor to the Dragon Burner V8 toolhead. The author specifies the following probe offsets for configuration: X=-37.2, Y=10.1. Included Parts - Dragon Burner PFACatBody + Duct.stp.stl - Dragon Burner PFACatBody + Duct.stp Assembly Guidance According to the author, the assembly process for this component is the same as the regular fan shroud.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Dragon Burner Shroud w/ CR Touch w/o Ears

Dragon Burner Shroud w/ CR Touch w/o Ears

Dragon Burner Shroud w/ CR Touch w/o Ears Purpose This model is a remixed version of the Dragon Burner Shroud. It is specifically modified to remove the "ears" from the original design and to reposition the probe to a slightly higher position to prevent collisions. Practical Uses This shroud is intended for use with a Dragon Burner setup utilizing a CR Touch probe. The modifications are designed to address clearance issues and physical interference encountered with the standard version. Included Parts - CRTouchNOEars.stl Printing/Assembly Guidance Not provided in the source text.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar