Meshopia · EnglishEnglish
MESHOPIA

6 modelos etiquetados

#cyberbrick

Descubre modelos 3D etiquetados como cyberbrick y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →
Vista de Soporte de batería sobre el eje delantero para crawler Hornet

Battery mount on the front axle for Hornet crawler

Mount to place the battery on the front axle of the competition-style Hornet crawler based on CyberBrick. The author indicates that it requires their modified axle, which they call the "wild axle" in the description. It should not be assumed compatible with the standard axle without comparing the parts. Changing the battery position modifies the weight distribution, but does not guarantee a performance improvement on every build. Preparation, compatibility, and printing First identify the axle associated with the design and check the mount's anchor points. Verify steering clearance, articulation, and cables throughout the full range of motion. The housing must hold the battery without compressing it. Battery dimensions, material, and print profile are not specified; those decisions require checking the actual assembly.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Hexágonos de rueda V2 para crawler Hornet CyberBrick

Wheel Hexagons V2 for Hornet CyberBrick crawler

Second version of the wheel hexagon adapters for the Hornet crawler based on CyberBrick. The author indicates that four M8 nuts are required for the assembly. The download contains the printed parts and does not include that hardware. Not all compatible axle or rim measurements are specified in the text. Preparation, compatibility, and printing Check the Hornet variant, the nut housing, and the rim fit before printing. Avoid deforming the housing when inserting the nuts and verify that the wheels rotate without rubbing. No material, layer, or infill are documented. After assembly, check retention, clearance, and concentricity before using the vehicle.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Ruedas grandes para crawler Hornet CyberBrick

Large wheels for Hornet CyberBrick crawler

Alternative wheels for the CyberBrick-based Hornet crawler, proposed by its author to use different tires. The source does not specify inner diameters, widths, or tire references. The title "large wheels" is descriptive and does not replace a measurement comparison. Preparation, compatibility, and printing Measure the tire seat, the axle, and the clearance from the suspension and bodywork. A larger wheel modifies the available space and may require other parts of the assembly. Maintain the original scale during checking and do not scale to adjust only one diameter without checking the rest. No material or print profile is documented.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Eje ancho para crawler Hornet compatible con motores N30

Wide axle for Hornet crawler compatible with N30 motors

Wide axle variant for the Hornet crawler based on CyberBrick. The author indicates that it allows the use of N30 motors, which are larger than those in their previous configuration. The publication does not make any N30 motor electrically compatible with the vehicle controller nor does it provide a validated gear ratio. Preparation, compatibility, and printing Check the assembly parts, their housings, and the connection with the wheels before manufacturing. Compare the actual motor and the space required for terminals and wiring. The modification may affect the total width and the suspension travel. No material or print profile is specified; prepare fit tests before assembling the complete axle.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Anclaje de tirantes para crawler Hornet CyberBrick

Suspension link mounts for Hornet CyberBrick crawler

Anchor pieces for the suspension rods of the Hornet crawler based on CyberBrick. The author refers to them as "STRONG," but the available documentation does not provide tests to quantify an improvement in strength. They are presented as a mounting variant, not as a certified reinforcement. Preparation, compatibility, and printing Identify the position of each piece and compare holes and supports with the chassis. Check that the ball joints or rods travel through their full angle without touching the anchors. Layer orientation must be studied based on the stresses of the assembly. No material or infill percentage is documented; first validate fit and movement in a static state.

Technology
Sin probar
material
—
Difficulty
Sin especificar
Vista de Juego de tirantes elevados para crawler Hornet CyberBrick

High-clearance link set for Hornet CyberBrick crawler

Higher clearance links for the Hornet crawler based on CyberBrick. Its shape aims to leave more space under the suspension links compared to a straight link. The source does not detail functional lengths, hardware, or geometry changes, so it is not stated that the assembly automatically maintains all vehicle adjustments. Preparation, compatibility, and printing Select the part corresponding to each position and compare the distance between mounting centers. Check articulation, ball joint angles, and potential interference with axles and drivetrain. Do not change the scale to resolve a single fit. The source does not document a print profile; prepare a test and check the full range of motion before driving.

Technology
Sin probar
material
—
Difficulty
Sin especificar