Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#cr-10s

Descubre modelos 3D etiquetados como cr-10s y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de CR-10 / CR-10S X axis right side cover

CR-10 / CR-10S X axis right side cover

Purpose: 1. This is an X-axis right side cover designed for aesthetic purposes to cover the bare metal look of the printer. It is not a functional X-axis tensioner. 2. The design is intended to sit on the side of the printer without interfering with the extruder or the belt. 3. Practical Uses: Use as a decorative shield for the Creality CR-10 or CR-10S models. 4. Included Parts: Cache_X_CR-10_OUT_EXTENDED.stl, Cache_X_Cr-10S_IN_EXTENDED.stl, Cache_X_CR-10_OUT.stl, Cache_X_CR-10S_OUT_EXTENDED.stl, Cache_X_CR-10_IN_EXTENDED.stl, Cache_X-CR10S_IN_EXTENDED_BOLD.stl, X_axis_shield-without_text_EXTENDED.stl, Cache_X_CR-10_IN.stl, X_axis_shield_without_text.stl, Cache_X_CR-10S_OUT.stl, Cache_X_CR-10S_IN.stl. 5. Printing/Assembly Guidance: Print with 15-30% infill and higher resolution. Supports are not required. The author suggests printing on the right (hollow) side of the shield to simplify cleanup and avoid wasting material in supports.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar