Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

2 modelos etiquetados · Página 1 de 1

#amd

Descubre modelos 3D etiquetados como amd y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Buscar esta etiqueta en el catálogo →
Vista de AMD BC-250 with CPU Cooler Mount Adapter

AMD BC-250 with CPU Cooler Mount Adapter

AMD BC-250 with CPU Cooler Purpose This model is a CPU cooler mount adapter designed specifically for the BC-250 board. According to the author, implementing this cooler setup reduced maximum temperatures from 92°C to 72°C during testing. Practical Uses It is intended to facilitate the mounting of a specific CPU cooler (referenced via https://a.co/d/gyw5dgC) onto the BC-250 board to improve thermal management. Included Parts The download includes the following file: - BC250-Cooler-Mount.stl Assembly Guidance To mount the cooler to the 3D printed adapter, use the longer Intel brackets. The assembly requires M4 nuts and bolts for mounting.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de DeepCool AN600 adapter for AMD BC-250

DeepCool AN600 adapter for AMD BC-250

DeepCool AN600 Adapter for AMD BC-250 Purpose This 3D-printable mounting solution is designed to facilitate the installation of a DeepCool AN600 cooler onto the AMD BC-250 motherboard. Practical Uses This adapter allows users to repurpose or utilize the DeepCool AN600 low-profile cooler specifically with the AMD BC-250 hardware platform. Included Parts This model requires the Intel mounting brackets that are included with the DeepCool AN600 kit. The following hardware is necessary for installation: - 4x M3 x 12mm bolts - 4x M3 x 20mm bolts - 8x M3 nuts Printing and Assembly Guidance To prevent warping or sagging under thermal load, it is recommended to use high-temperature, stiff filaments such as ASA, ABS, or Carbon Fiber/Glass Fiber reinforced PETG (CF-PETG / GF-PETG). Suggested print settings include: - Walls: 4 - Top/Bottom Layers: 6 - Infill: 30% Cubic High wall counts and a cubic infill pattern are suggested to ensure the structural rigidity required for consistent mounting pressure.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar