30 modelos etiquetados

#airframe

Descubre modelos 3D etiquetados como airframe y revisa sus datos de impresión, archivos y condiciones de uso antes de descargarlos.Open all filters →

RC & MecánicaGratis

Razorblade — 3D Printable RC Delta Jet

A swept delta-wing RC sport aircraft with twin vertical fins and a streamlined cockpit. Its multipart printable airframe includes the wing and fuselage sections plus supporting components. PACKAGE CONTENTS 45 STL files, 1 DXF file. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Cessna 152 — 3D Printable RC Aircraft

A light-aircraft-style RC trainer with a high-mounted wing, cabin fuselage and conventional tail. Separate printed airframe sections and supporting parts allow a multipart assembly. PACKAGE CONTENTS 3 PDF files, 37 GCODE files, 33 FACTORY files, 4 INI files, 4 SLICE files, 50 STL files in the original complete package. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. ADDITIONAL NATIVE PROFILES The separate cessna-152-native-profile-additions.zip contains four additional Simplify3D FACTORY source files: landing-gear spring, landing-gear pins, left wing strut and right wing strut. They retain the supplied bytes under English filenames and include an English source-file map. These profiles supplement the original ZIP and require software, printer and material compatibility checks before use. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

ICON V3 — 3D Printable RC Amphibious Aircraft

A compact amphibian-style RC aircraft with a raised wing, streamlined cockpit and an elevated rear propulsion arrangement, supplied as a multipart printable assembly. PACKAGE CONTENTS 33 STL files, 1 PDF file. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Kraga Kodo — 3D Printable RC Slope Glider

A slender RC glider with long wings and visible lightweight lattice structures. The printable parts form a multipart airframe whose external finish depends on the assembly and covering process. PACKAGE CONTENTS 1 PDF file, 66 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

F-86 Sabre — 3D Printable RC Jet

A Sabre-inspired RC jet airframe with swept wings, a rounded forward intake and a single vertical tail. Printed fuselage and wing components are supplied separately. PACKAGE CONTENTS 1 PDF file, 52 GCODE files, 50 FACTORY files, 93 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Junkers Ju 87 Stuka — 3D Printable RC Aircraft

A Stuka-inspired aircraft with a distinctive bent wing and propeller-driven layout. This smaller package contains eleven STL files; inspect their coverage before treating it as a complete airframe. PACKAGE CONTENTS 11 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Messerschmitt BF 109 — 3D Printable RC Aircraft

A BF 109-inspired RC warbird with a narrow fuselage, low wing, enclosed cockpit and conventional tail. Printable sections and supplied preparation files support a multipart build. PACKAGE CONTENTS 2 PDF files, 8 GCODE files, 8 FACTORY files, 35 STL files, 3 INI files, 3 SLICE files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA. ADDITIONAL BF 109H LANDING-GEAR CONVERSION PARTS A separate ZIP adds five newly recovered STL meshes: left and right inner wing sections prepared for landing gear, main and tail landing-gear patterns, and a conversion rudder. These source files belong to the me109_H_LG_conversion folder. They are additional conversion parts, not another complete airframe. Every added filename is in English and an English guide maps each part to its source label. Original STL bytes and coordinates are preserved; binary triangle counts were checked. Confirm dimensions, variant compatibility, assembly fit, hardware requirements and print preparation before use. The conversion has not been physically built or flight tested by MESHOPIA. The original aircraft package and watermarked cover remain available.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Messerschmitt BF 109T — 3D Printable RC Aircraft

A BF 109T-inspired RC warbird variant with a low-wing, single-propeller layout. Its files are distinct from the accompanying standard BF 109 package. PACKAGE CONTENTS 2 PDF files, 6 GCODE files, 6 FACTORY files, 31 STL files, 3 INI files, 3 SLICE files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

P-47 N-15 Thunderbolt — 3D Printable RC Aircraft

A P-47-inspired single-propeller RC aircraft with a broad fuselage and low-wing layout. The package includes multipart airframe geometry and machine-specific preparation files. PACKAGE CONTENTS 2 PDF files, 13 GCODE files, 13 FACTORY files, 40 STL files, 3 INI files, 3 SLICE files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

P-38 Lightning — 3D Printable RC Aircraft

A P-38-inspired RC airframe with two engine nacelles, twin tail booms and a central cockpit pod. Its distinctive structure is supplied as separate printable components. PACKAGE CONTENTS 2 PDF files, 12 GCODE files, 12 FACTORY files, 3 INI files, 3 SLICE files, 54 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

MiG-15 — 3D Printable RC Jet

A MiG-15-inspired RC jet with a prominent nose intake, swept wings and a single vertical fin. Printable sections and preparation files are included. PACKAGE CONTENTS 2 PDF files, 4 INI files, 4 SLICE files, 31 FACTORY files, 38 GCODE files, 56 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

P-51D Mustang — 3D Printable RC Aircraft

A P-51D-inspired RC warbird with a streamlined nose, low wings and bubble-canopy profile. Printable components are supplied for assembly. PACKAGE CONTENTS 2 PDF files, 6 GCODE files, 6 FACTORY files, 4 INI files, 4 SLICE files, 34 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA. ADDITIONAL P-51D ACCESSORIES A supplemental ZIP contains six original source-labelled 3DLabPrint P-51D accessory STL designs: separate left and right exhausts, left and right wheel covers, a steering servo mount and a steerable tail mount. All files have new English names and a source-label guide; original STL bytes are unchanged. The source combined-exhaust STL was truncated and has been excluded; both valid individual exhaust files are provided. Check fit and print preparation before use; these accessories have not been physically tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Kraga Maripi — 3D Printable RC Aircraft

An RC sport aircraft with a conventional wing and tail layout and visible lightweight lattice construction. Parts are supplied individually for printing and assembly. PACKAGE CONTENTS 1 PDF file, 68 STL files, 3 STEP files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Piper Pawnee — 3D Printable RC Agricultural Aircraft

A Pawnee-inspired propeller aircraft with a low-mounted wing and raised cockpit. The recovered archive includes eighty-two STL files; the archive reports an unexpected end and one unreadable decal PDF, so this is explicitly a recovered partial package. PACKAGE CONTENTS 96 GCODE files, 2 PDF files, 49 FACTORY files, 4 SLICE files, 82 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Savage V5 — 3D Printable RC Bush Aircraft

A bush-plane-style RC aircraft with a high wing, visible supporting struts and large-wheel landing-gear presentation. The airframe is supplied as separate printable parts. PACKAGE CONTENTS 36 STL files, 1 PDF file. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Qtrainer — 3D Printable RC Trainer Aircraft

A compact propeller-driven trainer-style RC aircraft with a conventional tail and separate printable airframe sections. PACKAGE CONTENTS 2 PDF files, 34 GCODE files, 34 FACTORY files, 4 INI files, 4 SLICE files, 59 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

EasyMax 001 — 3D Printable RC Sailplane

An electric sailplane-style RC airframe with a long-span wing and slender fuselage, supplied as individual printable sections. PACKAGE CONTENTS 3 PDF files, 4 GCODE files, 4 FACTORY files, 3 INI files, 3 SLICE files, 34 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Stearman PT-17 Kaydet — 3D Printable RC Biplane

A Stearman-inspired RC biplane with stacked wings, interplane struts and a radial-engine-style nose. Its multipart printable geometry supports assembly of the airframe. PACKAGE CONTENTS 2 PDF files, 35 FACTORY files, 4 INI files, 4 SLICE files, 35 GCODE files, 67 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Zivko Edge Hannes Arch — 3D Printable RC Aerobatic Aircraft

An Edge-inspired single-propeller RC aerobatic aircraft with a low-mounted wing, streamlined fuselage and compact landing gear. Separate geometry and preparation files are supplied. PACKAGE CONTENTS 2 PDF files, 9 GCODE files, 9 FACTORY files, 4 INI files, 4 SLICE files, 38 STL files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

RC & MecánicaGratis

Supermarine Spitfire Mk IX & Mk XVI — 3D Printable RC Aircraft

A Spitfire-inspired RC warbird collection with characteristic elliptical wings and a single-propeller layout. Source folders include Mk IX and Mk XVI material; variants and alternate files are retained rather than presented as one interchangeable set. PACKAGE CONTENTS 4 PDF files, 1 DWG file, 68 GCODE files, 64 FACTORY files, 129 STL files, 6 INI files, 6 SLICE files. Exact duplicate files are supplied once. The included file-name map identifies each original path and its renamed counterpart. PRINTING AND ASSEMBLY Parts are supplied separately. Review the build documentation and individual meshes to choose print orientation, material, support strategy and assembly sequence. Printer profiles and G-code are supplied as reference material and must be checked for compatibility before use. Electronics, motors, radio equipment and other purchased hardware are not supplied as physical items. PRESENTATION AND LICENSE Published by MESHOPIA under CC0 on the basis of the rights holder authorization confirmed by the uploader. Original creator references inside supplied documentation are retained. The cover is an original MESHOPIA visualization of the assembled model in an RC hobby setting; it does not document a completed build or a flight test. Assembly and flight readiness have not been independently tested by MESHOPIA.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

P-51 Mustang 1090 mm — Printable RC Airframe Kit

P-51 Mustang printable RC airframe from a separate source set labelled with a 1090 mm wingspan. The design has a streamlined fuselage, low wings, canopy area and conventional tail, with segmented components and alternate source part variants. PACKAGE CONTENTS The ZIP contains 28 unique original STL files for ailerons, fuselage sections, cockpit, nose, engine-section geometry, stabilizers, tail sections, servo mount and wing sections, with new English filenames and an English source-label guide. Exact byte-identical duplicates are supplied once. Original STL bytes and coordinates are unchanged. The viewer shows one source component in its original printing pose. Download the complete ZIP for all parts. DESIGN AND ASSEMBLY This is a separate source-labelled 1090 mm airframe design. It is not a confirmed interchangeable variant of the existing 3DLabPrint P-51D listing. Alternative files remain separate designs and should not all be assembled simultaneously. Select a consistent configuration, inspect dimensions, thin walls, hinge gaps, component fit, supports and print orientation, and supply appropriate purchased hardware and electronics. The 1090 mm designation comes from the source collection name; MESHOPIA has not independently verified the assembled wingspan. Motor, propeller, radio, battery, electronics and purchased hardware are not included. Printing, physical assembly, balance and flight readiness have not been tested. ORIGINAL MESHOPIA PRESENTATION The cover was generated locally in ComfyUI using this kit’s assembled source visualization, with a new teal finish, realistic printed surfaces, camera, lighting and neutral studio background. It illustrates the airframe, without an added propeller or landing gear. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Yak-55 — Single-Mesh Aerobatic Airframe STL

Yak-55 digital aircraft mesh. Simplified Yak-55 aerobatic airframe mesh with fuselage, an open cockpit recess, main wing, visible control surfaces and tail. No propeller, canopy glazing, landing gear, motor or electronics is included. PACKAGE CONTENTS The complete ZIP contains the original single STL mesh and an English file guide. The same STL is also available separately as the 3D viewer file. All added filenames are in English, with the original label mapped in the guide. Original STL bytes, triangle data and source coordinates are preserved. The aircraft is represented as one digital mesh, not a supplied multipart printable assembly kit. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the aircraft design; this is a simplified digital airframe representation. PREPARATION AND USE Use for digital display, rendering or further model preparation. Check topology, mesh integrity, wall thickness, watertightness, disconnected surfaces, supports, orientation and dimensions before printing. No verified print profile, tested physical build or working RC system is claimed. Motor, electronics, radio, hardware and other absent components are not included. ORIGINAL MESHOPIA PRESENTATION The image was created locally in ComfyUI from an original Blender render of this supplied mesh, with a new satin teal finish and studio lighting. It is an AI-assisted visualization, not a photograph of a manufactured or tested aircraft. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

SDSU AIAA DBF 2013 — Aircraft Concept STL and STEP Assembly

SDSU AIAA DBF 2013 digital aircraft model. Aircraft concept mesh with a compact forward fuselage, rectangular wing surfaces with exposed airfoil sections, a long slender tail boom, tail surfaces, propeller and simplified landing gear. The source label refers to the SDSU AIAA DBF 2013 design. PACKAGE CONTENTS The ZIP contains the original STL aircraft mesh, the supplied native STEP assembly and an English source-file guide. The STL is also supplied separately for the web viewer. The STEP assembly has not been verified in its original CAD application. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original local Blender render of the actual supplied geometry, with new teal materials, studio camera, lighting and background. Its openings and partial structures are preserved, without adding absent aircraft components. It depicts a proposed finish, not a photograph of a manufactured or tested aircraft. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Extra 300 — Single-Mesh Aerobatic Airframe STL

Extra 300 digital aircraft model. Simplified Extra 300 airframe mesh with fuselage, low wing, defined control surfaces and tail. The front cowl is open. No motor, propeller, canopy glazing or landing gear is supplied in this mesh. PACKAGE CONTENTS The ZIP contains the original STL mesh and an English source-file guide. The same STL is supplied separately for the web viewer. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original local Blender render of the actual supplied geometry, with new teal materials, studio camera, lighting and background. Its openings and partial structures are preserved, without adding absent aircraft components. It depicts a proposed finish, not a photograph of a manufactured or tested aircraft. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Christen Eagle II — Biplane Aircraft Mesh STL

Christen Eagle II digital aircraft model. Christen Eagle II biplane display mesh with upper and lower wings, interplane struts, fuselage, rounded tail surfaces, propeller and simplified landing gear. The source folder mentions Kyosho Minium; compatibility with a physical Kyosho product has not been tested. PACKAGE CONTENTS The ZIP contains the original STL mesh and an English source-file guide. The same STL is supplied separately for the web viewer. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original local Blender render of the actual supplied geometry, with new teal materials, studio camera, lighting and background. Its openings and partial structures are preserved, without adding absent aircraft components. It depicts a proposed finish, not a photograph of a manufactured or tested aircraft. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Aero L-39 Albatros — Fuselage Structure STL

L-39 Albatros digital aircraft model. Partial L-39 Albatros fuselage structure consisting of open frames, longitudinal rails and a cylindrical forward section. This source is a fuselage structure, not a complete aircraft: no wings, tail, outer skin, canopy, propulsion or landing gear is included. PACKAGE CONTENTS The ZIP contains the original STL mesh and an English source-file guide. The same STL is supplied separately for the web viewer. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original local Blender render of the actual supplied geometry, with new teal materials, studio camera, lighting and background. Its openings and partial structures are preserved, without adding absent aircraft components. It depicts a proposed finish, not a photograph of a manufactured or tested aircraft. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Siyahkanat — Racing Aircraft Mesh STL

Siyahkanat Racing Airplane digital aircraft model. Streamlined racing aircraft mesh with a narrow fuselage, swept-looking main wing outline, raised cockpit fairing, tail surfaces, forward propeller and small forward surfaces. The file is labelled Siyahkanat. No operational RC equipment is supplied. PACKAGE CONTENTS The ZIP contains the original STL mesh and an English source-file guide. The same STL is supplied separately for the web viewer. All added filenames are in English and mapped to the original labels in the guide. Original source bytes and numerical coordinates are preserved. This is a digital design asset; no verified multipart printable aircraft kit is claimed. SOURCE VERIFICATION The binary STL triangle count was validated and the supplied geometry imported into local Blender for visual inspection. Source units and physical dimensions have not been independently confirmed. The source label identifies the design represented. PREPARATION AND USE Suitable for digital display, rendering and further model preparation. Inspect topology, thin walls, watertightness, disconnected surfaces, supports, orientation and dimensions before fabrication. Physical printing, component fit and functional RC operation have not been tested. Hardware, electronics and any components absent from the source mesh are not included. ORIGINAL MESHOPIA PRESENTATION The cover is an original local Blender render of the actual supplied geometry, with new teal materials, studio camera, lighting and background. Its openings and partial structures are preserved, without adding absent aircraft components. It depicts a proposed finish, not a photograph of a manufactured or tested aircraft. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

F/A-18 Hornet — Digital Aircraft OBJ and Texture Package

F/A-18 Hornet digital aircraft model. Simplified twin-engine jet airframe with swept wings, leading-edge extensions, paired vertical fins, tailplanes, cockpit-shaped upper fuselage and open exhaust outlets. PACKAGE CONTENTS The ZIP contains the OBJ mesh, its material library, five supplied texture images and an English source-file guide. OBJ and MTL companion references are adapted to the English filenames; numerical vertex coordinates are preserved. Texture maps retain their original bytes. Maps are technical assets, not gallery photos. All added filenames are in English. SOURCE VERIFICATION The supplied assembled mesh was imported and visually inspected in local Blender. Binary STL triangle counts, where applicable, were checked. Source units and physical dimensions have not been independently confirmed. This listing represents the supplied digital geometry and its stated variants. PREPARATION AND USE Use for display, rendering or further model preparation. Check mesh integrity, thin walls, watertightness, supports, orientation, dimensions and component compatibility before fabrication. Printing and functional RC operation have not been tested. Motors, radios, electronics, hardware and absent geometry are not included. ORIGINAL MESHOPIA PRESENTATION The original cover is a local Blender render of the actual supplied assembled geometry, with new teal materials, studio camera, lighting and background. It preserves the available shapes without inventing absent components. The image represents a proposed finish rather than a photograph of a manufactured aircraft. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Supermarine Spitfire — DIY Airframe STL Parts and Variants

Supermarine Spitfire digital aircraft model. DIY Spitfire airframe collection with elliptical wings, a rounded vertical tail, control-surface outlines, segmented fuselage and wing sections. The supplied complete example depicts the assembled airframe without a propeller or landing gear. PACKAGE CONTENTS The ZIP contains 47 original STL assets across the Electronoobs and alternate DIY source groups, including a complete-aircraft example and split airframe parts. Variants are labelled separately in the English guide; interchangeability and fit have not been verified. Original STL bytes and numerical coordinates are preserved. The complete example is supplied separately for display and assembly reference, not a verified single-piece printing recommendation. All added filenames are in English. SOURCE VERIFICATION The supplied assembled mesh was imported and visually inspected in local Blender. Binary STL triangle counts, where applicable, were checked. Source units and physical dimensions have not been independently confirmed. This listing represents the supplied digital geometry and its stated variants. PREPARATION AND USE Use for display, rendering or further model preparation. Check mesh integrity, thin walls, watertightness, supports, orientation, dimensions and component compatibility before fabrication. Printing and functional RC operation have not been tested. Motors, radios, electronics, hardware and absent geometry are not included. ORIGINAL MESHOPIA PRESENTATION The original cover is a local Blender render of the actual supplied assembled geometry, with new teal materials, studio camera, lighting and background. It preserves the available shapes without inventing absent components. The image represents a proposed finish rather than a photograph of a manufactured aircraft. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar

Vehículos y transporteGratis

Vought F4U Corsair — Airframe Files and F2G Conversion

Vought F4U Corsair RC airframe file collection with the included F2G conversion group. The Corsair family is recognizable by its inverted gull wings; the presentation cover shows the F2G-style assembled configuration in a new teal finish. PACKAGE CONTENTS The ZIP includes the supplied F4U base and F2G conversion STL parts, native FACTORY projects and printer-specific GCODE files, all under separate English filename prefixes. It also contains 147 binary STL members recovered from the FACTORY containers and an English source-file and profile guide. Embedded mesh bytes are preserved and STL triangle counts and lengths validated. Repeated parts and slicer layouts may occur across different profiles. One recovered print part is provided separately for the web viewer; it is not a complete aircraft mesh. ASSEMBLY AND PRINTING This is a multipart airframe collection requiring selection of compatible base and conversion parts. Check source units, printer settings, wall thickness, supports, orientation and component fit. Native GCODE is printer-specific, unexecuted and must be reviewed for the intended machine. Hardware, electronics, radio equipment and propulsion are not supplied. No physical build, proven RC performance or verified print profile is claimed. ORIGINAL MESHOPIA PRESENTATION Our own local ComfyUI cover uses the supplied assembled F2G image as a shape reference, with a new color scheme, studio background, lighting and camera presentation. It illustrates a proposed assembled finish. Supplier photographs are excluded from the gallery. LICENSE Published by MESHOPIA under CC0 with uploader authorization.

Technology: Sin probar
material: —
Difficulty: Sin especificar