Meshopia · EspañolEspañol
MESHOPIAModelismo y radiocontrol

65 modelos publicados · Página 2 de 2

Electrónica

Explora modelos 3D de Electrónica publicados en Meshopia. Consulta los archivos, la información de impresión disponible y la licencia de cada ficha.Abrir todos los filtros →
Vista de DJI RC-Controller Lanyard Bracket

DJI RC-Controller Lanyard Bracket

DJI RC-Controller Lanyard Braket Purpose This model is a bracket designed to attach a lanyard to the DJI RC-Controller. Practical Uses It allows the user to secure the controller via a lanyard. Note that while the design maintains access to the charging port, the "Host" and Micro SD ports are not accessible to avoid increased bulk. Included Parts - DJI RC Lanyard Braket (.3mf file) - Required hardware: Two M4 x 8mm screws (not included) Printing and Assembly Guidance For optimal strength, it is recommended to use 4 or 5 perimeters and 4 or 5 solid layers, as the part may bend when hanging from a lanyard. Assembly is completed by using two M4 x 8mm screws to attach the bracket to the controller.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de RC Car Part (wheel bracket, maybe?)

RC Car Part (wheel bracket, maybe?)

This model was created to serve as an identical opposite part for a broken RC car component. The author suggests it may be part of a steering bracket, possibly for a Tamiya vehicle. Practical uses include replacing broken components in RC cars where a mirrored version of the original part is required. Included files: - rc_car_part.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Mount for Flysky or other RC Antenna

Mount for Flysky or other RC Antenna

Mount for Flysky or other RC Antenna Purpose This model is a remix designed to facilitate the panel mounting of an RC antenna, such as those used with Flysky systems. Practical Uses It is intended for users who need to secure an antenna through a panel, providing a dedicated housing that allows for wire management. Included Parts - Antenna Holder.stl Design Features The model includes a specific gap designed to accommodate wires, enabling the antenna to be mounted through a surface or panel while maintaining wire connectivity.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Brennenstuhl Rc 3600 Remote

Brennenstuhl Rc 3600 Remote

Brennenstuhl Rc 3600 Remote Purpose This model is a redesigned remote control intended to replace the original Brennenstuhl Rc 3600 remote. The design aims to address quality issues found in the original, specifically replacing a low-quality build that produces a rattling sound with a silent and satisfying clicking mechanism. Practical Uses This replacement remote is used to control the Brennenstuhl Rc 3600 device. The design features a visible battery compartment, which allows for a thinner profile that is intended to prevent the battery from popping out. Included Parts - TOP.stl - BOTTOM.stl Printing and Assembly Guidance The author suggests printing the model using PETG at a 0.2mm layer height.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Servo Mount 40mm (Calmato)

Servo Mount 40mm (Calmato)

Servo Halterung 40mm (Calmato) Purpose This model is a servo mount designed specifically to accommodate a 40mm servo. According to the author, this plate is suitable for use with the Kyosho Calmato Sport. Practical Uses It is intended for use in RC aircraft applications, specifically as a mounting solution for 40mm servos within the Kyosho Calmato Sport airframe. Included Parts - Servo 40mm.stl Printing/Assembly Guidance No specific printing or assembly instructions are provided in the source text.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de DC Power Supply

DC Power Supply

This model is a housing for a constant current / constant voltage (CC/CV) power supply that features a PWM output. The design utilizes an HP DPS-460EB 12V power supply as its core component. According to the author, the unit is capable of providing up to 30V DC 5A CC/CV and a PWM output of 5V 30V 12A. 120-300 words when facts suffice, otherwise be concise.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Associated Monster GT Truck R/C Car Stand

Associated Monster GT Truck R/C Car Stand

Purpose This jack stand and test stand is designed for the Monster GT and other RC cars or trucks. It is intended to hold the vehicle snug and firm off the ground for warming up and tuning purposes. Practical Uses The stand provides a stable platform to keep an RC vehicle elevated during maintenance or testing. Included Parts MGT STAND TOP (1).stl MGT STAND BASE.stl SPLIT-BASE PART 1.stl SPLIT-BASE PART 2.stl Printing/Assembly Guidance The base model does not include cutouts. The author suggests adding cutouts in Cura using 6 bottom layers to create screw pockets for holding small screws while working.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de DJI RC2 Remote - Mountain Bike Handlebar Mount

DJI RC2 Remote - Mountain Bike Handlebar Mount

DJI RC2 Remote - Mountain Bike Handlebar Mount Purpose This model provides a solution for attaching a DJI RC2 remote to mountain bike handlebars. It is designed to offer a sturdier mounting option for remote controllers during outdoor activities. Practical Uses Designed for use on 35mm handlebars. The author has tested the mount during rock rolls and other activities, noting it held up well, though it has not been tested on super hard trail rides. For 31.8mm bars, the author suggests using a similar Garmin-style mount that utilizes two screws to allow for mount replacement. Included Parts - DJI Mount v5.4.stl - GoPro Garmin Mount Adapter v1.3.stl Printing and Assembly Guidance The author recommends printing the model laying down with the GoPro mount facing up. Suggested print settings include using PETG with 40% Gyroid infill and 8 perimeters. Supports should be used everywhere, but the author recommends painting the supports off the GoPro mount to ensure easier removal. For assembly, the author recommends using GoPro-style mounts equipped with a rubber stopper to prevent slipping. Metric screws are required for attaching the mount to the remote.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Protective cover for DC Binding Posts

Protective cover for DC Binding Posts

Protective cover for DC Binding Posts Purpose This model consists of two TPU covers designed to provide insulation for the backside of DC binding posts. They are intended to cover bare, uninsulated M8 bolts and nuts located inside a battery enclosure, such as an ammo box, to prevent accidental contact. Practical Uses These covers are used in battery pack setups where binding posts are mounted through a container wall. They provide a safety solution for the exposed hardware (bolts and terminals) on the interior side of the mounting point, making them suitable for outdoor applications like astronomy setups. Included Parts - Bind post safety cover.stl (2 pieces) Printing and Assembly Guidance Based on the creator's successful print, the following settings were used: - Printer: Prusa original Mini - Material: Sunlu TPU filament - Nozzle Temperature: 240°C - Bed Temperature: 60°C - Print Speed: 20 mm/s - Layer Height: 0.2 mm - Infill: 10% gyroid Assembly is achieved via pressure-fitting the covers over the bolts and terminals.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de DC Motor Adaptor for Lego

DC Motor Adaptor for Lego

Purpose: A model designed to hold standard DC motors to enable connection to the Lego Technic System. Practical Uses: This adaptor allows for the integration of standard DC motors into Lego Technic builds. Included Parts: - Lego_Motor_Adaptor_Axle.stl - Lego_Motor_Adaptor_Body.stl Printing/Assembly Guidance: Use tree support for the body. Print the axle using a high quality preset to ensure rigidity. For additional security, the rubber holder found in a yellow geared motor can be used to hold the motor in place.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de Enduro/Supermoto License Plate Holder for GasGas EC 300 2002

Enduro/Supermoto License Plate Holder for GasGas EC 300 2002

This model is a foldable license plate holder designed specifically for GasGas EC 300 (2002) models. It is intended for use in Supermoto and Enduro applications where a collapsible plate holder is required. Practical uses include mounting a license plate on a GasGas EC 300 that can be folded away, making it suitable for various riding styles including off-road and street-legal Supermoto configurations. The digital files included in this set are: - kenzeichen halter ec 300 2002.stl - kenzeichen halter ec 300 2002 plade.stl - Abstandhülse.stl Regarding printing guidance, the author suggests using TPU for the spacer sleeve (Abstandhülse) to achieve the desired properties. The remaining components of the holder should be printed using PLA or PETG. For the rear light component, the author provides a reference link: https://amzn.eu/d/bGidhtm.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de FPV Mount

FPV Mount

FPV Mount Purpose This model is an FPV mount designed for mounting cameras. According to the author, it is intended for use on the tails of RC planes, though it is also noted for various other applications. Practical Uses Based on the provided tags, this mount can be used for FPV (First Person View) video setups in RC planes and RC cars. It serves as a holder for cameras to facilitate video recording or live streaming in these hobbyist contexts. Included Parts - Part Studio 1 - Part 1 (1).stl Printing and Assembly Guidance No specific printing parameters, material requirements, or assembly instructions are provided in the source text.

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de JETI RCSW HOLDER

JETI RCSW HOLDER

The JETI RCSW HOLDER is a holder designed for an RC switch. Practical uses include mounting or securing an RC switch in place. Included parts: RCSW V3.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar
Vista de DC Motor Mount

DC Motor Mount

This model is a motor mount designed to hold a DC motor in place. Practical uses include providing a stable base for DC motors in various mechanical or robotic projects. Included files: dc motor mount.stl

Tecnología
Sin probar
Material
—
Dificultad
Sin especificar