Model information
Description
Purpose
This adapter is designed to connect the exhaust from an xTool S1 to a Fumeclear FC-2003 fume extractor. The author states this part allows for a shorter exhaust run compared to using a silicone adapter.
Practical Uses
It can be used to facilitate a more direct exhaust path. The author notes it may work for other Fumeclear parts or can be remixed to fit different adapters.
Included Parts
- Exhaust Adapter_final.stl
Printing/Assembly Guidance
The author designed this part with TPU in mind and reports that it works well with that material. The xTool S1 side has a 90mm inside diameter, and the Fumeclear side has a 66mm outside diameter.
Original text by the author on Printables
<p>This part is designed to take the exhaust from the xTool S1 and feed the fumes into a Fumeclear FC-2003. This silcone adapter works but I wanted to short the run for the exhaust, so this part allows for that. </p><p>This may work for other Fumeclear parts or can easily be remixed to fit other adapters. </p><p>The S1 side of the adapter has a 90mm inside diameter. The Fumeclear side has a 66mm outside diameter. </p><p>This was designed with TPU in mind as the material and works well with that. </p><p> </p><p>xTool S1 - <a href="https://www.xtool.com/products/xtool-s1-laser-cutter">https://www.xtool.com/products/xtool-s1-laser-cutter</a></p><p>The Fumeclear extractor - <a href="https://www.fumeclear.com/products/fumeclear%C2%AE-fc-2003-fume-extractor-194cfm">https://www.fumeclear.com/products/fumeclear%C2%AE-fc-2003-fume-extractor-194cfm</a></p><p> </p><p>Enjoy!</p><p> </p>
Questions and contributions