MESHOPIAModel sheet · for your workshop
RC & Robotics
Xpress Execute FT1S Bumper, Final
Authorship, licence & source
- Original author
- Chris Loving
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/381905
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Xpress Execute FT1S Bumper, Final
Purpose
This model is a replacement bumper designed for the Xpress Execute FT1S. According to the author, this version is intended to perform better than the original bumper, specifically maintaining durability during racing and hard crashes.
Practical Uses
This part is intended for use in RC racing environments. The author reports that the bumper successfully withstood 7 hours of track use and hard crashes.
Included Parts
- Bumper_Final_version.stl
Printing and Assembly Guidance
The author recommends using Ninjaflex 85A material. Suggested print settings include:
- Top/Bottom layers: 0
- Walls: 1
- Infill: 50%
The author suggests scaling up the Z-value to 12mm, or to your desired height.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.