The author reports using Ninjaflex 85A material. Printing instructions provided: Top/Bottom layer = 0, Walls = 1, Infill = 50%. The author suggests scaling up the Z-value to 12mm (or the desired height). The author states that after 7 hours of racing and hard crashes, the bumper is holding up and working well, noting it is better than the original bumper.
Original text by the author on Printables
<p>Material Ninjaflex 85A</p><p>Top/Bottom layer = 0</p><p>Walls = 1</p><p>Infill = 50%</p><p>Scale up Z-value to 12mm (or the height you want)</p><p> </p><p>Update:</p><p>Have spent the day on track and racing for 7hours and done some hard crashes and the bumper is holding up and is working really good! Better than original bumper</p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.