MESHOPIAModel sheet · for your workshop
Electronics
Lever for Xbox controller and drone simulator
Authorship, licence & source
- Original author
- Teagin Land
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Aircraft, Helicopters & Drones
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
Accessory placed over an Xbox controller stick to use it as a lever in a drone simulator. Its function is to modify the grip of the controller during the simulation; it does not convert the controller into a radio control transmitter nor does it add direct communication with a drone. The source does not identify all compatible controller revisions.
Preparation, compatibility, and printing
The author specifies PLA and supports. Compare the housing with your controller's stick and check that the accessory does not press buttons or limit the range of motion. Carefully remove the supports in the engagement areas. Start with a fit test without forcing the stick; then configure sensitivity and calibration within the simulator.
Manufacturing & assembly notes
The author specifies PLA and supports. Compare the housing with your controller's stick and check that the accessory does not press buttons or limit the range of motion. Carefully remove the supports in the engagement areas. Start with a fit test without forcing the stick; then configure sensitivity and calibration within the simulator.
Declared changes from the original
Imported CC0 model with an automated editorial listing; the generated photographic cover is pending.