MESHOPIAModel sheet · for your workshop
RC & Robotics
turbo rc fan
Authorship, licence & source
- Original author
- 3Dzer
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/268281
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
This model is a small design produced to test the mechanical performance of FDM 3D printing. It was tested on a 1/8 scale RC vehicle, specifically mounted on the center differential of a Jammin X1 crt truggy. The author reports that the part successfully held up to rotation speeds of 30,000 rpm.
Practical Uses
The part functions as an impeller fan/air blower for RC vehicles, specifically intended for use on a center differential.
Included Parts
The model includes the impeller fan (file: 11.014.6V4.STL). For assembly, use two 2.5mm x 4 screws for the clamping collar.
Printing and Assembly Guidance
According to the author, the following parameters were used for successful results:
- Materials: PLA+ or PC-GF
- Layer height: 0.16
- Line width: 0.4
- Supports: Use supports during printing.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.