MESHOPIAModel sheet · for your workshop
RC & Robotics
Thunder Tiger Raptor 30/50/SE Tail pushrod guides
Authorship, licence & source
- Original author
- Jason H.
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/653297
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Thunder Tiger Raptor 30/50/SE Tail pushrod guides
Purpose
These models are replacement tail pushrod guides designed for the Thunder Tiger Raptor 30, 50, and SE RC helicopters. They serve as an alternative to scarce or expensive original factory parts.
Practical Uses
These guides are intended for use in RC helicopter tail assemblies. While the author printed these in Ovature PLA, they suggest using ASA or PETG for applications requiring outdoor durability and heat resistance.
Included Parts
- rod guide.STL
Printing and Assembly Guidance
The author recommends printing at a 0.2mm layer height. For stability during printing, a 5mm brim should be used both inside and outside the model. No supports are required for this print. Because these are made to factory original size, the author notes that printer calibration must be accurate to ensure a proper fit. The author reports that they have test-fitted these parts and they fit perfectly.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.