Thunder Tiger Raptor tail pushrod guides. The author reports printing these at 0.2mm with Ovature PLA and suggests using ASA or PETG for outdoor use and heat resistance. The author used a 5mm brim inside and out for stability and notes that no supports are needed. The author states they are made to factory original size and reports that they have test fit them and they are perfect.
Original text by the author on Printables
<p>Im feeling nostalgic and bought a Raptor 30. But parts are scarce and expensive on the flea-bay. So I made some.</p><p>Up for your printing enjoyment is Thunder Tiger Raptor Tail pushrod guides.</p><p>I printed them out @ 0.2 in Ovature PLA. I will probably do the final in ASA or PETG because of the outdoors and heat..</p><p>I used a 5mm Brim inside and out for stability</p><p>No supports needed.</p><p>Just make sure your printer is on point with its calibration, they are made to factory original size. I have test fit them and they are perfect.</p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.