Model information
Description
Tecnock RC Car gear
Purpose
This model is a replacement gear designed for the motor of a Tecnock RC car. The author created this part to replace an original gear after one of its teeth snapped off.
Practical Uses
It serves as a functional substitute for a broken motor gear in a Tecnock RC car. The author notes that this specific version may result in a louder operating sound, which they suggest is likely due to excessive slop between the gear teeth.
Included Parts
- Gear_5_10mm_Capped.stl
Printing and Assembly Guidance
No specific printing or assembly instructions are provided in the source text.
Original text by the author on Printables
<p>I decided to make my own gear for my RC car when one of the teeth on the original one snapped off. I found that using this gear makes the car louder, which probably means that there's too much slop between the gear teeth. I will probably try to make a better version in the future, but for now, this works.</p><p> </p>
Questions and contributions