MESHOPIAModel sheet · for your workshop
RC & Robotics
Tamiya XV-02 upgrade direct steering
Authorship, licence & source
- Original author
- przemo_m
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 6 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1346656
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Tamiya XV-02 Upgrade Direct Steering
Purpose
This model is an upgrade for the Tamiya XV-02 direct steering chassis. According to the author, the upgrade is designed to improve the turning radius and eliminate play within the steering system compared to the original setup.
Practical Uses
It is intended for use on Tamiya XV-02 RC chassis to enhance steering precision and maneuverability.
Included Parts
The digital files provided include:
- Main board tamiya XV02 (new version for better service)
- Main board tamiya XV02
- Battery guard old servo mount
- Servo saver board tamiya XV02
- XT 60 holder
- Steering arm tamiya XV02 (2 pieces)
Printing and Assembly Guidance
The author recommends using PETG or a stronger material for printing and specifically does not recommend using PLA. The author reports using PETG for this upgrade without problems.
To complete the assembly, the following hardware is required:
- 2 pieces of 30mm x 4.6mm M3 hex spacers
- M3 nuts
- M3 screws
- M3 x 30mm screws (used to secure the handle to the bottom of the chassis near the main gear)
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.