MESHOPIAModel sheet · for your workshop
RC & Robotics
SPEC Wing aileron cutting miter box
Authorship, licence & source
- Original author
- Jonathan_Ott
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/513052
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose
This miter box is designed to cut aileron stock to the correct angle to match the sweep of an FPVWRA Spec Wing.
Practical Uses
It can be used with a tool such as an X-Acto razor saw to ensure accurate cuts on aileron stock.
Included Parts
Miter Box.stl
Printing Guidance
The author reports that using three bottom and three top layers with 10% infill uses approximately 5.95m (17.88g) of filament and takes about 2h 15m, depending on the setup.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.