Purpose This miter box is designed to cut aileron stock to the correct angle to match the sweep of an FPVWRA Spec Wing.
Practical Uses It can be used with a tool such as an X-Acto razor saw to ensure accurate cuts on aileron stock.
Included Parts
Miter Box.stl
Printing Guidance The author reports that using three bottom and three top layers with 10% infill uses approximately 5.95m (17.88g) of filament and takes about 2h 15m, depending on the setup.
Original text by the author on Printables
<p>Quick miter box to cut (with something like an X-Acto razor saw) aileron stock to the correct angle to match the sweep of an FPVWRA Spec Wing.<br><br>If you do three bottom and three top layers, with 10% infill it uses ~5.95m (17.88g) of filament and takes about 2h 15m, depending on your setup.</p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
Download content
Files included
These files are part of the model download.
1 file · 9 KB
STL
Meshopia-513052-Component-2194336.stlMain 3D view · 9 KB
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.