Información del modelo
Descripción
SKR 2 Bracket for CR-10 V2/V3
Purpose
This bracket is designed to facilitate the installation of a BigTreeTech SKR 2 mainboard within the stock electronics box of a CR-10 V2 or CR-10 V3 3D printer.
Practical Uses
It serves as a mounting solution to replace or supplement the stock mainboard, allowing users to upgrade their printer's control system while maintaining the original housing.
Included Parts
- SKR2_Bracket.stl
Printing and Assembly Guidance
To secure the bracket, attach it to the stock mainboard standoffs using double-sided tape. The SKR 2 board can then be attached to the bracket using the stock M3 button-head screws.
Recommended Print Settings:
- Resolution: 0.2mm
- Infill: 35%
- Supports: No
- Rafts: No
- Compatible Materials: Generic PLA, ABS, or PETG
- Printer Example: Creality Ender 3
Texto original del autor en Printables
<p>This bracket will fit into the stock electronics box for the CR-10 V2/V3 where you can install a BigTreeTech SKR 2 mainboard. Secure the bracket onto the stock mainboard standoffs with a bit of double-sided tape and attach the SKR 2 board with the stock M3 button-head screws.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>No</p></div>
<p><strong>Resolution:</strong></p>
<p>0.2mm</p>
<p class="detail-setting infill"><strong>Infill: </strong>
<div><p>35</p></div>
<p><strong>Filament:</strong>
Generic PLA, ABS, PETG
Any color</p>
</p></p></p>
Category: 3D Printer Parts
Preguntas y aportaciones