Model information
Description
SCX24 upgrade 180/320 motor
Purpose
This model is a motor conversion designed for the Axial SCX24. The upgrade aims to replace the original motor, which the author reports often burns out under long-term load, with a unit that provides higher speed and better performance in extreme conditions, such as mud.
Practical Uses
This conversion is intended for RC crawler enthusiasts looking to improve the drive unit's durability and power output during heavy-duty or high-load driving scenarios.
Included Parts
- HGD1_14t_Pinion.stl
- aJprwKyApLG (4).stl
- Kolo v převodovce Originál Axial.stl
Printing and Assembly Guidance
The author recommends printing the gears in PET-G, noting that it proved most effective during testing. While PLA was used initially, PET-G was found to be superior. The author also tested ASA but noted that the small gears deformed during the printing process because the ASA could not cool fast enough; therefore, PET-G is the recommended material.
Original text by the author on Printables
<p>Pro Axial SCX24 nám originální motor při dlouhodobějším zatížení často shořel a tak jsme se rozhodli vylepšit pohonnou jednotku která dodá autu daleko vyšší rychlost a při extrémních podmíkách (bahno atd.) se pohon jen tak nezastaví ani nespálí. Tištěné ozubené kola jsme tiskli nejprve z PLA, ale nejvíc se odvědčilo PET-G. zkoušeli jsme i ASA ale malé ozubené kola se při tisku dost deformovaly ASA nestíhala chladnout a tak bych doporučil PET-G.</p>
Questions and contributions