MESHOPIAModel sheet · for your workshop
Tools
Scanner Aid for CR Raptor
Authorship, licence & source
- Original author
- Gerald Nelson
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1199197
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Scanner Aid for CR Raptor
Purpose
This tool is designed to assist with scanning processes. According to the author, it can also serve as an aid for model painting, photography, or displays.
Practical Uses
It is designed to fit the Creality Raptor pad perfectly, allowing for easy extrusion operation using a finger.
Included Parts
To complete the assembly, the following components are required:
- A steel spacer with a 1/2" OD
- A shaft collar with 1/2" ID and 1" OD
- A flanged ball bearing for a 1/2" OD shaft (housing OD of 1", protruding on one side only)
- Eskonke Retaining Compound 638 (to glue the shaft to the bearing)
Printing and Assembly Guidance
The author suggests using PLA with 20% gyroid infill and a few walls. If the tool is intended for heavier objects, more walls should be used. For assembly, the author recommends scuffing the bearing housing with sandpaper and using Slow CA with an accelerant to glue the bearing in. The bearing depth and flange size are not critical as the shaft collar manages the depth. The author noted that on their specific unit, they had to Dremel the hole for the shaft collar to ensure a proper fit.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.