MESHOPIAModel sheet · for your workshop
Accessories
Satsana Ender 3 Fan Duct for CR-Touch
Authorship, licence & source
- Original author
- e30andrew
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/248591
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Satsana Ender 3 Fan Duct for CR-Touch
Purpose
This model is a modified remix of the Satsana Fan Shroud/Duct by eric-anastas. It is specifically designed for the Ender 3 Pro to accommodate the Creality CR-Touch touch sensor using its standard hardware.
Practical Uses
This shroud serves as a 3D printer accessory to integrate a CR-Touch sensor with the fan duct system on an Ender 3 Pro.
Included Parts
- Satsana_CR-Touch_Remix.stl
- cable cap.stl
Printing and Assembly Guidance
To print, the author suggests using a block object to prevent support generation on overlaps, ensuring only the bottom connecting sections are supported. While the author used a .16mm layer height, they noted that .2mm may also work.
Reported print settings from the author:
- Printer: Creality Ender 3 Pro
- Rafts: No
- Supports: Yes
- Resolution: 200
- Infill: 38
- Filament: Overture PLA
Post-printing, use an X-Acto blade or razor to remove supports from the connecting sections. This step is necessary to provide enough room for the CR-Touch bracket to install properly.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.