Model information
Description
Replacement steering wheel for RC car controller
Purpose
This model is designed as a replacement part for a broken steering wheel on an RC car controller. The author provides this as a potential alternative to modeling a custom wheel from scratch, though they note it may not suit every specific controller model.
Practical Uses
It is intended for repairing RC car remote controls where the original steering wheel component has broken.
Included Parts
- Replacement steering wheel for RC car.stl
Printing and Assembly Guidance
The author recommends using PLA or PETG material with a 0.20mm layer height and 15% infill. The model does not require supports. For assembly, the design includes a single layer in the middle of the screw hole intended to divide it, allowing for easier piercing with a screw.
Original text by the author on Printables
<p><strong>Replacing the broken steering wheel part from the RC car controller</strong></p><p>Unfortunately, the steering wheel of our son's RC car controller broke (by itself - of course :) )<br>So it was necessary to make a "cool" replacement. Here it is!</p><p>This model probably won't suit you specifically, but maybe it will and you won't have to model it yourself :)</p><p><strong>Printing:</strong></p><ul><li>In the middle of the model, for easier printing, there is one layer that divides the hole for the screw - you can easily pierce it with a screw.</li><li>PLA/PETG</li><li>Without any support</li><li>0.20 layer</li><li>Infill 15 %</li></ul><p><strong>Enjoy!</strong></p>
Questions and contributions