MESHOPIAModel sheet · for your workshop
RC & Robotics
Replacement steering wheel for RC car controller
Authorship, licence & source
- Original author
- Repoholy
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/580012
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Cars, Crawlers & Off-road
- Project type
- Functional RC
- Part type
- Wheels / Tires / Tracks, Axles / Suspension / Steering
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
Replacement steering wheel for RC car controller
Purpose
This model is designed as a replacement part for a broken steering wheel on an RC car controller. The author provides this as a potential alternative to modeling a custom wheel from scratch, though they note it may not suit every specific controller model.
Practical Uses
It is intended for repairing RC car remote controls where the original steering wheel component has broken.
Included Parts
- Replacement steering wheel for RC car.stl
Printing and Assembly Guidance
The author recommends using PLA or PETG material with a 0.20mm layer height and 15% infill. The model does not require supports. For assembly, the design includes a single layer in the middle of the screw hole intended to divide it, allowing for easier piercing with a screw.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.