Model information
Description
A replacement steering wheel for an RC car controller. The author notes that this model may not suit every specific controller, but is provided as a potential alternative to modeling one from scratch.
Printing instructions: The model includes a single layer in the middle of the design that divides the screw hole to allow for easier piercing with a screw.
Author's report: The author used PLA/PETG with 0.20mm layer height and 15% infill. No supports are required.
Original text by the author on Printables
<p><strong>Replacing the broken steering wheel part from the RC car controller</strong></p><p>Unfortunately, the steering wheel of our son's RC car controller broke (by itself - of course :) )<br>So it was necessary to make a "cool" replacement. Here it is!</p><p>This model probably won't suit you specifically, but maybe it will and you won't have to model it yourself :)</p><p><strong>Printing:</strong></p><ul><li>In the middle of the model, for easier printing, there is one layer that divides the hole for the screw - you can easily pierce it with a screw.</li><li>PLA/PETG</li><li>Without any support</li><li>0.20 layer</li><li>Infill 15 %</li></ul><p><strong>Enjoy!</strong></p>
There are no comments yet. Verified ratings and makes appear separately below.