Información del modelo
Descripción
This model is a remix of armor rails designed for the Yaesu FT-891 radio and the Yaesu FC-50 tuner. The original design has been split into smaller components specifically to accommodate users with smaller print beds, such as an Ender 3 V2.
Purpose and Practical Uses
The purpose of these rails is to provide armor/rail protection for the Yaesu FT-891 radio and the FC-50 tuner. By splitting the parts, the model allows for the printing of larger accessories on standard-sized hobbyist printers.
Included Parts
The files included in this set are:
- FT_891 Tuner Armor Rail 1.stl
- FT_891 Tuner Armor Rail 2.stl
- FT_891 Radio Armor Rail 1.stl
- FT_891 Radio Armor Rail 2.stl
Printing and Assembly Guidance
For printing, the radio rail requires supports due to the bend in the handle. The other parts should print without supports, provided the files are oriented with the recess facing upwards. If you need to print parts for the opposite side, you must mirror the files in your slicer software. Regarding assembly, if you are not using the screws provided with the FC-50 kit, be sure to note the maximum screw length required.
Texto original del autor en Printables
<p>The radio rail will need supports due to the bend in the handle, but the other parts should print fine without as long as you print the files with the recess oriented upwards.</p><p>To print on the opposite side, mirror the arts in your slicer software.</p><p>Please note the max screw length if you are not using the screws that comes with the FC-50 kit.</p>
Preguntas y aportaciones