MESHOPIAModel sheet · for your workshop
RC & Robotics
RC Model Waterproof Pushrod Boot (Vase Mode Printing Required)
Authorship, licence & source
- Original author
- Pali
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/353069
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
RC model waterproof boot vase mode
Purpose
This model is a waterproof boot designed to protect pushrods on an RC model.
Practical Uses
It is used to seal pushrod areas against water ingress. For a tighter seal at the exit part, the user can adjust the size by scaling the model or modifying the line width within the slicer. The author notes that applying silicone grease can result in quieter and smoother operation.
Included Parts
- Boot.stl
Printing and Assembly Guidance
To achieve waterproofing, the author recommends printing the model in vase mode. The material used for the provided example was Geeetech Black TPU 95A. For installation, the part can be fixed in place using superglue.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.