MESHOPIAModel sheet · for your workshop
RC & Robotics
RC F1 Boat With Outboard Mercury Racing 360
Authorship, licence & source
- Original author
- Khairul Syarif nasution
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 13 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1065073
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
This RC F1 Powerboat kit consists of a 70cm F1 hull and a Mercury Racing 360 style outboard engine. The outboard engine stands 20cm in height and is designed for use with hulls 70cm or larger. It features a water-cooling system, a gear lubricant hole, and adjustable trim and height mounting.
Practical Uses
This kit is designed for remote-controlled watercraft enthusiasts. The outboard engine is versatile, intended to be compatible with various hulls above 70cm.
Included Parts
- Outboard Engine Components: 2x 4mm 15t 0.8 bevel gear shafts, 1x 604zz bearing, 5x 684zz bearings, 4mm 30cm shaft, 4mm drive dog, rigid coupler joint (4x5), propeller (up to 50mm), brushless motor (up to 4076 size), 18x M2.5 heat inserts, 18x M2.5x5 screws, 2x M3 x35/40 screws with nuts, 1x M2x3 self-tapping screw, and 2x push rod connectors.
- Hull Components: 16x M3x8mm screws, 4x M3x25mm screws with nuts, 3x M3x40mm screws with nuts, and push rod or stainless steel leader fishing wire.
Printing and Assembly Guidance
- Outboard Engine: Use a 0.4mm nozzle with 0.15mm layer height. Set 5 perimeters, 5 top/bottom layers, and 30% infill. No support is required. The author used PLA for the main body and ABS for the motor mounting.
- F1 Hull: Use a 0.4mm nozzle with 0.2mm layer height. Set 2/3 perimeters, 4 top/bottom layers, and 15% infill. Support is only required for the servo mount.
- General FDM Settings: 0.4mm nozzle, 0.2mm layer height, 4 perimeters, 4 top/bottom layers, and 30% infill.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.