Model information
Description
Purpose: This is a simple stand designed to assist with RC car springs and tires. 1. Practical Uses: It can be used as a jack or stand for RC cars and other models. 2. Included Parts: carjack.stl. 3. Printing/Assembly Guidance: The author suggests printing with PLA using 15% infill and 2 perimeters without supports. A nail is used as a pin during assembly. If a larger version is required, the author suggests scaling the model up in the slicer.
IMAGE PRESENTATION
The cover is an original AI-assisted MESHOPIA illustration based on the supplied geometry, showing a proposed finish during workshop inspection. It is not evidence of a manufactured, fitted or tested part. Tools and surrounding objects illustrate context and are not included.
Original text by the author on Printables
<p>simple thing for help chill RC car springs and tires , I printed from PLA , 15 % infil ,2 perimeters without suport. this stand ist from 5 cm to 6,5 cm higness . I also used nail as pin . If you need bigger , just make bigger in slicer.. Iam sure will works . </p>
Questions and contributions