MESHOPIAModel sheet · for your workshop
RC & Robotics
RC Car Body Post Cushion
Authorship, licence & source
- Original author
- Daniel Cardona
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/587367
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Cars, Crawlers & Off-road
- Project type
- Functional RC
- Part type
- Body / Cab / Interior
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
RC Car Body Post Cushion
Purpose
This model is an RC car body post cushion designed to support a polycarbonate body once it is mounted on posts. It serves as an alternative to using traditional body clips combined with pieces of foam.
Practical Uses
These cushions are intended to rest the polycarbonate body on the mounting posts. While the design lacks a small curve at the top, the author suggests this can be achieved by applying heat to prints made from PLA or PETG to create a permanent curve.
Included Parts
- RC car body post cushion (STL file)
Printing and Assembly Guidance
The author recommends using TPU as the best material for this part. Successful print tests were conducted using the following settings:
- Fiberlogy MattFlex 40D TPU: 4 walls and 100% infill.
- PETG: 4 walls and 100% infill.
- PLA+: The author notes that PLA+ should also work for this application.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.