MESHOPIAModel sheet · for your workshop
RC & Robotics
RC Boat Camera Enclosure and Radar Tower
Authorship, licence & source
- Original author
- Alex
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1599840
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Boats & Marine
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
RC Boat Camera Enclosure and Radar Tower
Purpose
This kit is designed to add realism to RC boat models. It includes an FPV camera enclosure and a radar tower assembly.
Practical Uses
The camera enclosure is specifically designed to fit the AKK KC04 5.8G camera. The radar components are printed as separate pieces to facilitate the placement of brand logos, which can be glued on after printing. The author noted that FURUNO and FLIR logos were printed and glued separately.
Included Parts
- Flir Camera RC Boat (3mf)
- Rescue Boat Tower (3mf)
Printing and Assembly Guidance
The author recommends using ABS for these parts due to environmental exposure and higher temperatures. For the tower, it is suggested to print it standing up using tree supports. The radar components are not joined during printing to allow for the easy application of logos.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.