An RC boat accessory kit featuring an FPV camera enclosure and a radar tower. The camera enclosure is designed to fit the AKK KC04 5.8G. The radar components are printed as separate pieces to allow for the placement of brand logos, which can be glued on later. The author notes that the FURUNO and FLIR logos were printed and glued separately.
Printing instructions: The tower prints better standing up using tree supports.
Author's report: The author used ABS for these parts due to exposure to higher temperatures and the environment.
Original text by the author on Printables
<p>Given the exposure to higher temperatures and the environment I used ABS for these parts. Tower prints better standing up with tree supports. The radar will not be joined in order o facilitate the placement of any brand logos (easily glued afterwards). The FURUNO and FLIR logos were printed and glued separately as I am not sure what the brand implications are.</p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.