Información del modelo
Descripción
This model is a remix of the "Prusa XL Buddy cover" designed to accommodate an 80x80 fan and a DC barrel jack. Its purpose is to provide a customized housing for these specific components on a Prusa XL printer.
Practical uses include upgrading the printer's cooling or ventilation setup. If using a 24V fan, it can be powered directly from the XL board.
Included parts
- PrusaXL_Cover_Fan_80x80.stl
- PrusaXL_Cover_Fan_80x80.step
Printing and assembly guidance:
To mount the fan, four screws with countersunk heads (M4x14 or longer) and nuts are required. Because the rear side of this remix is thicker, the original Buddy cover screws must be replaced with longer M3x12 screws.
Texto original del autor en Printables
<p>This is a remix of the "Prusa XL Buddy cover", which fits an 80x80 fan and a DC barrel jack.</p><p>The fan can be mounted with four screws with countersunk heads (M4x14 or more) and nuts.</p><p>The original Buddy cover screws should be replaced with longer ones (M3x12) as the rear side is thicker.</p><p>If you are using a 24 volt fan, you can power it directly from the XL board.</p>
Preguntas y aportaciones