Model information
Description
Pitot tube mount for RC planes
Purpose
This model is a compact pitot tube mount designed with an integrated sensor. It is intended for use in RC planes to facilitate airspeed measurement.
Practical Uses
To accommodate different hardware configurations, the model is provided in two distinct variants: one designed for a rectangular case and one for a round case.
Included Parts
The model files include:
- pitot-mount-rect.3mf
- pitot-mount.3mf
Printing and Assembly Guidance
According to the author, the following steps are required for assembly:
Preparation:
- Cut excess wires from the back side of the PCB to save vertical space.
- Cut stainless pipes, leaving approximately 5mm for both tubes.
Printing
- Print both sides using supports.
Assembly
- Sand planes slightly to ensure a better connection.
- Assemble the components as shown in the reference photo.
- Apply a small amount of glue to one side, press the parts firmly together, and secure them with a clamp while drying.
Original text by the author on Printables
<ol><li><p>Cut excess wires from back side of pcb to save vertical space</p></li><li><p>Cut stainless pipes, leaving approximately 5mm for both tubes</p></li><li><p>Print both sides with supports</p></li><li><p>Sand plane slightly for better connection</p></li><li><p>Assemble like on photo </p></li><li><p>Apply small amount of glue for one side, press firmly and secure it with any clamp for drying</p></li></ol><p></p>
Questions and contributions