Model information
Description
Purpose
This is a pen holder mod designed for the Creality CR-6. It is intended to be attached to the k2van's CR-6 dragon hotend mount.
Practical Uses
The holder is designed to accommodate certain pens, such as the Parker Royal Jotter, which will friction fit at the upper part.
Included Parts
- penholder.stl
Printing and Assembly Guidance
To install, unscrew the two M3 screws holding the hotend fan, detach the fan, place the pen holder in the fan's position, and secure it with the two M3 screws. The author recommends printing with PETG to provide desirable flex. Note that some slicer settings will need to be modified.
Original text by the author on Printables
<p>A simple pen holder mod for the Creality CR-6.<br>You can attach it to this:<br><a href="https://www.printables.com/model/126838-cr-6-dragon-hf-sf-and-orbiter-v15-direct-drive-mou">https://www.printables.com/model/126838-cr-6-dragon-hf-sf-and-orbiter-v15-direct-drive-mou</a></p><p>Unscrew the 2 M3 that holds the hotend fan then completely detach the hotend fan.</p><p>Just put the pen holder in place of the fan and fix it with the 2 M3.</p><p>Print it from PETG as some flex is somewhat desirable.</p><p>You will need to modify some slicer settings. There are many “universal” guides on the internet that generally work well.</p><p> </p><p>Kinda universal, but these kind of pens will friction fit (at the upper part):<br>https://www.parker.hu/parker_parker_royal_jotter_royal_blue_golyostoll#tartalom</p>
Questions and contributions